Dissertation > Excellent graduate degree dissertation topics show

Non-central Catadioptric Camera Calibration Using Generalized Unified Model

Author: DaiXing
Tutor: XiangZhiYu
School: Zhejiang University
Course: Information and Communication Engineering
Keywords: central catadioptric camera non-central catadioptric camera unifiedprojection model generalized unified model calibration self-calibration
CLC: TB852.1
Type: Master's thesis
Year: 2014
Downloads: 11
Quote: 0
Read: Download Dissertation


Omni-directional catadioptric cameras featuring the advantage of large field of view over the traditional perspective cameras are being increasingly used in lots of fields such as robotics navigation, surveillance, video Conferencing, etc. Depending on whether they pose a single viewpoint, catadioptric cameras can be classified as central or non-central imaging systems. Central catadioptric cameras are ideal but not realistic. Non-proper relative position between the mirror and the camera will cause misalignment, which makes cental catadioptric camera non-central. Existing models for central catadioptric cameras, such as unified projection model, degenerate quickly while misalignment becomes large. And existing models for non-central catadioptric cameras are always very complex, and hard to calibrate or use. Therefore, it’s urgent to find a novel model which keeps the simplicity but works well even under severe misalignment.In this paper, a generalized unified model(GUM) has been present. By adding two parameters to the unified projection model, the GUM can compensate the misalignment quite well. It works well even under severe misalignment, while maintaining the simplicity of unified projection model. This makes it easy to calibrate and use non-central catadioptric camera.Based on the GUM, we give out a method for calibration with planar grids. The model and method works well even under severe misalignment. We test our model with both synthetic images and real images. Both experiments prove the validity of our model and calibration method.With the GUM’s forward projection, backward projection and epipolar geometry, a full self-calibration method has been proposed. The GUM can be calibrated with two images automatically. Also, simulation and real experiment verify the effectiveness of GUM and the self-calibration method.

Related Dissertations

  1. Quantitative Analysis of Pyrolysis Component of Typical Low Volatile Coal of Chinese,TQ530.2
  2. The Research of 3D Human Motion Capture Based on Reference Points,TP391.41
  3. Camera Calibration and Position and Pose Detecting on Vision Measurement System of PCB,TP391.41
  4. Key Control Technique of Wafer Handling Robot,TP242.2
  5. Sound source directional mobile robot Methods,TP242
  6. Cross-Calibration of HJ1-CCD,TP751
  7. Welding Orientation System Development of Container Reinforced Plate Based on Opencv,U169
  8. Application of high pressure common rail diesel engine technology in the development of,TK42
  9. Approach for Calibration and Orientation of Digital Camera Based on Linear Features,TP391.41
  10. Calibration and Application of Inertial Measurement Unit Based on MEMS Gyro,V241.5
  11. Automatic Calibration System Voltage Monitor,TM933.2
  12. A Self-calibration Method of Camera Based on Binocular Stereo Vision,TP391.41
  13. Research and Implementation of Vheicle Detection Algorithms Based on Fisheye Image,TP391.41
  14. Installation paste dimensional detection based on machine vision patch,TP391.41
  15. Research on Automatic Field Calibration of Precision Thermometer for Process Industry,TH811
  16. Research and Application of Camera Calibration in Vision Measurement System,TP391.41
  17. Temperature Compensation and Auto-calibration of High-Precision Electronic Balance,TP274
  18. High-altitude meteorological ground -based GPS system software design and implementation,TP311.52
  19. Research on Technology of Terrain Measuring Based on Binocular Vision,TP391.41
  20. The Design and Research of Flow Calibrating Control System Based on Balanced Flow Meter,TH814
  21. Optimization and Experimental Study of Image Correlation Algorithm,TP391.41

CLC: > Industrial Technology > General industrial technology > Photography > Photographic machines and equipment > Photographic equipment and replication equipment > Camera
© 2012 www.DissertationTopic.Net  Mobile