Dissertation > Excellent graduate degree dissertation topics show

Design and control of trajectory correction projectile of electric actuator

Author: MengBing
Tutor: YaoWenJin
School: Nanjing University of Technology and Engineering
Course: Artillery , automatic weapons and ammunition Engineering
Keywords: BLDC Structure design Double closed loop control system Simulation
CLC: TJ410
Type: Master's thesis
Year: 2014
Downloads: 24
Quote: 0
Read: Download Dissertation

Abstract


Ammunition is endued with higher requirement on intelligence and dexterity in the modern warfare. The trajectory correction projectile is a kind of guided ammunition widely used all over the world. Depending on the excellent control characteristics and correction ability, the electric actuator used as the key device of the projectile correction, has been studied and applied widely. This paper carried on the study based on the electric actuator of the120mm trajectory correction mortar and presents new structure and control method.According to the structure and flying characteristics of the mortar shells, combined with the newly developed electromechanical integration technology, the paper proposed new structure of the actuator and put forward the system using BLDC as the power device and ARM microcontroller as the core of the control system.Firstly, two new mechanistic models of the electric steering are proposed and dynamic and load analysis carried on in the following and find suitable parameters of the BLDC. Then the control of Brushless DC motor is researched, including the design of the double closed loop control system of the current and the speed of revolution, the design of PI controller, the design of the hardware circuit including the driving circuits, the speed measurement circuits, the current sampling circuits, the design of the software system including driving and commutation procedures, the improved M/T speed measurement procedures and PI interrupt procedures.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  7. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  8. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  9. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  10. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  11. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  12. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  13. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  14. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  15. Numerical Simulation of Biomass Direct Reburning,TK16
  16. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  17. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  18. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  19. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  20. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  21. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2

CLC: > Industrial Technology > Arms industry > Ammunition, fuses, pyrotechnics > Ammunition > General issues
© 2012 www.DissertationTopic.Net  Mobile