Dissertation > Excellent graduate degree dissertation topics show

Research on the Hydraulic System for New Ballast Distributing and Profiling Machine

Author: WangYu
Tutor: YingLiJun
School: Central South University
Course: Transportation equipment Information Engineering
Keywords: ballast distributing and profiling machine four wheelsasymmetric drive mode closed hydrostatic system operating hydraulicsystem AMESim simulation
CLC: U216.6
Type: Master's thesis
Year: 2013
Downloads: 10
Quote: 0
Read: Download Dissertation

Abstract


With the development of high-speed railway, our existing large-scale road maintenance machinery has been increasingly unable to meet the demand of work efficiency. At present, the main models of ballast distributing and profiling machine have been produced on the basis of SPZ-200which was introduced in the1990s. Judging from the current situation, this model has been lagging far behind the world-class level. Because of the unevenly ballasted unloading, the situation of ballast accumulation often happens in actual use. A new style of ballast distributing and profiling machine produced by CSU and some company in Zhuzhou has settled these problems down by optimizing the hydraulic and electrical systems on the basis of the existing machines.This paper reviews the research and the development of domestic and abroad on ballast distributing and profiling machines, and compares their technical parameters and performance characteristics as well. Then, it gives the process of the hydraulic system design and calculation. The main content is as follows:(a) A brief description of the overall composition of the new machine.(b) The selection of four wheels asymmetric drive mode in the contrast of running driver modes. This drive mode can meet a variety of conditions traction requirements on the basis of extended range.(c) This paper gives the design of closed hydrostatic system of the new machine. In the same time, it focus on the analysis of the running hydraulic system loop. Then, the technical parameters of main elements are determined by calculation. And the models of main elements are selected by confrontation.(d) It gives the design of the operating hydraulic system and the process of calculation on the basis of the analysis operating agencies.(e) Using AMESim simulation software, this paper has built the simulation model of running driving hydraulic system and operation driving hydraulic system, and analyzes the response of the system in different working conditions. Through the analysis of the simulation results and contrast, it shows that the hydraulic system meets to the requirements of the design.

Related Dissertations

  1. 1200 tons automatic autoclaved fly ash brick molding equipment research and design of hydraulic systems,X705
  2. Analysis and Simulated Research of WY60 Excavator Hydraulic System,TU621
  3. Compound braking efficiency regenerative braking system stability and energy efficient recovery of,U463.5
  4. Study on the Abrasive Flow Polishing Machine and Its Process Parameters,TG580.692
  5. Study on Inversely-Proportional Relief Valve of Lateral Semi-Active Suspension System,U270.33
  6. High-speed sampling device large inertia transition process dynamics analysis and research,TF513
  7. Modeling and Simulation Research on Passenger Train Braking System,U270.35
  8. Control Charateristic Research on Axial Variable Displacement Piston Pump with Displacement-Force-Feedback Principle,TH322
  9. Automobile automatic collision hydraulic servo system design , and simulation,U463.5
  10. Energy-saving Design and Research to Hydraulic System of Continuous Casting Machine for Aluminum Ingot,TG233
  11. Dynamic Simulation for Belt of Belt Conveyor and the Finite Element Analysis for Driving Drum,TH222
  12. Research and Simulation of Electro-Hydraulic Control System for 900 Ton Transporting Girder Vehicle,U215.6
  13. Study on the Hydraulic System of the Synchronous Chip Seal Equipment,U415.5
  14. Modeling and Analysis of Vehicle TCS Hydraulic Control Device Using AMESim,U463.5
  15. The Electro-hydraulic Design of Hydraulic Hammer for Highway Guardrail,U415.5
  16. Design of Overall Construction of Hydraulic Lift and Hydraulic System,TU69
  17. Modeling and Simulation Research on Freight Train Braking System,U270.35
  18. Development of the Variable Displacement Piston Pump with Electro-hydraulic Proportional and Load-sensitive Control,TH322
  19. Research on the Variable Displacement Piston Pump with Electrohydraulic Proportional and Load-sensitive Control,TH137.51
  20. Study on the Clutch Automatic Operating System of Heavy-duty Commercial Vehicle,U463.212
  21. Manufacture and Research on the Characteristics of Jet Pipe Water Hydraulic Electro-Hydraulic Servovalve,TH137.52

CLC: > Transportation > Rail transport > Railway Line Project > Railway maintenance and repair > Railway maintenance, repair machinery and mechanization
© 2012 www.DissertationTopic.Net  Mobile