Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation of Heating and Cooling Process of Road Surface in Special Region and Environment

Author: JinGuangRi
Tutor: LiBingXi
School: Harbin Institute of Technology
Course: Engineering Thermophysics
Keywords: Accelerated loading test system Numerical Simulation TemperatureControl Optimization Design Swing-type blowing
CLC: U416
Type: Master's thesis
Year: 2012
Downloads: 11
Quote: 0
Read: Download Dissertation

Abstract


Accelerated Loading Test is an effective way of simulating actual environment and load of the road, and research in pavement material property and failure mechanism to solve practical engineering problems. Full scale accelerated loading system could duplicate same-size scale of the actual road structure, eliminates the small proportion to speed up the loading of the boundary effect of the system. Therefore, it has been widely adopted worldwide nowadays. Previous researches have shown that the road materials are very sensitive to extreme temperature, so accelerated loading experiments should precisely control over the road surface temperature for experimental road. The full scale accelerated loading systems currently running abroad are open systems and not yet possible to control the road surface temperature."Special geographical environment of structural materials testing device" of this project is an enclosing accelerated loading test track. The air temperature and road surface temperature can be controlled in this test track. As a result, Air temperature and pavement temperature control system are very important in the test system.Because there are not many previous work and material can be used in this project, so numerical simulation could provide the theoretical basis and data support for design and construction in air temperature and pavement temperature control system. In this thesis, commercial CFD software Ansys Fluent and integrated optimization software Ansys DesignXploer were used to simulated accelerated test subgrade surface air heating or cooling process and also the system design parameters and air supply pattern were optimized.First of all effect on road surface average temperature and temperature uniformity for different layout size and height in blowing inlet and outlet were studied. Second, propose feasibility analysis for further raise in road surface temperature uniformity. Last but not least, propose a swing-type blowing design. In order to optimize the result, we use pavement surface temperature uniformity as indicator for hot and cold air with different physical properties to determine the optimal outlet swing angle and swing cycle. The numerical simulation results show that this proposal could lead the temperature uniformity of the road meets the design requirement of3K, and easy to be applied in the construction projects.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  8. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  9. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  10. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  11. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  12. Numerical Simulation of Biomass Direct Reburning,TK16
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  18. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  21. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649

CLC: > Transportation > Road transport > Road works > Roadbed, pavement engineering
© 2012 www.DissertationTopic.Net  Mobile