Dissertation > Excellent graduate degree dissertation topics show

The Research of Prestressed High Strength Steel Wire Harness-composite Mortar Reinforcement Shear Performance

Author: HouLi
Tutor: ZhangYang
School: Hunan University
Course: Bridge and Tunnel Engineering
Keywords: Prestressed High strength steel wire harness Composite mortar Shear reinforcement
CLC: U445.72
Type: Master's thesis
Year: 2012
Downloads: 17
Quote: 0
Read: Download Dissertation


Under the influence of various internal and external factors, the concrete bridgeappear a variety of problems can not meet the load requirements, must be reinforced.Commonly used reinforcement Technical:increasing section method, pastereinforcement method, adding auxiliary member method, prestressed reinforcementlaw etc, however each method has its range of application, thus to find an efficient,simple, economic and suitable reinforcement methods of bridge strengthening methodbecome the engineering technical personnel’s important task.Based on the existing common reinforcement methods, this paper presentsprestressed high strength steel wire harness-composite mortar reinforcementtechnology, the reinforcement technology has the following advantages:(1)improvecrack resistance of structure, through by constraint of crack;(2)greatly improve thestructure bearing capacity and stiffness;(3)the tensioning and anchoring devicesimple and practical;(4) Introduction of initial tension can make full use of highperformance material strength.The main research contents and results are as follows:(1) Beam through the wire tension test to determine the feasibility of the tensionand anchoring device. Proposed steel beam effective formula between the tensileforce and torque wrench torque;(2) Research on the shear of prestressed high strength steel beam-reinforcedcomposite mortar reinforced concrete beams. Research the feasibility and practicalityof the method of the reinforcement; study the performance and failure modes ofconcrete beams cracking; experimental results show that: prestressed high strengthsteel beam-composite the mortar shear reinforcement method can significantlyimprove the shear cracking load of reinforced concrete beams, shear The ultimatebearing capacity, improve the structure of the force status;(3) Deduced prestressed high strength steel beam-cracking load and shearultimate bearing capacity of shear reinforcement structure of the composite mortarshear reinforcement method formula, using experimental data to validate the formula,the results show that the formula agreement with the experimental thanwell, meet therequirements of error;(4) Test beam simulation analysis using ANSYS finite element analysisprogram.By comparing the experimental and finite element analysis using ANSYS finite element analysis program reasonableness proven shear reinforcementparametric analysis. The study parameters including shear span ratio, compositemortar strength composite mortar thickness, the number of steel beam and the initialtensile force shear reinforcement effect, determines to be applicable in the reasonablerange of the parameters in the case of different reinforcement.

Related Dissertations

  1. Design and New Construction Technique Study of Prestressed Continuous Rigid Frame Bridge with Y-Pier,U448.23
  2. Design and Study on Structure of Prestressedconcrete Simple Supported-Continuous Beam Bridge,U448.215
  3. Research on the Strength of Carbon Fiber Rope Based on Theoretical Analysis and Experiment,U444
  4. Research on the Application and Theory of Non-metallic Anchorage System Based on FRP Materials,TU757.2
  5. Domestic and concrete highway bridge design method comparative analysis,U448.14
  6. Prestressed concrete bridge damage detection and evaluation methods,U448.35
  7. Study on Seismic Behavior of Prestressed Concrete Continuous Rigid Frame Bridge with High-Pier and Large-Span,U442.55
  8. Research on End Anchoring-grouting Prestressed Anchor Support Technology,TD353.6
  9. Theoretical and experimental study of unbonded prestressed beams CFRP,TU746.3
  10. Varying analysis considering shear lag effects of variable cross-section PC cantilever box girder,U448.213
  11. The Cut Slope Stability Analysis and Governance Research in Tong Ping Highway,U416.14
  12. PC box girder creep effect analysis based on ANSYS secondary development,U448.35;U441
  13. Study on Concrete Beam Bridge Which Reinforced by the Prestressed CFRP Plates,U445.72
  14. Dynamic Reliability Evaluation of Existing Prestressed Concrete Bridge Based on Bearing Capacity,U441
  15. The Numerical Analysis of the Crack of Prestressed Concrete Continuous Box Girder Bridge in Cold Area,U448.213
  16. Study on Mechanical Property of Prestressed Concrete Girders Strengthened with CFRP,U441
  17. Bearing Capacity Test Evaluation and Reinforcement Key Technology Research of Prestressed Concrete Changing Section Wide Hollow Slab Bridge,U441
  18. Research on the Structural Performance of Half-through Arch Beams Combined System Bridge,U448.22
  19. Study on the Factors Which Influence the Pre-stressed Concrete Bridges Cracking and Down-warping,U448.35
  20. Research on Prestressed Concrete Continuous Rigid-frame Bridge Construction Control and Fold Technology,U445.4
  21. Research on Prestressed Anchor Cable Support Technique for the Tunnel with Large Deformation,U455.7

CLC: > Transportation > Road transport > Bridges and Culverts > Bridge Construction > Bridge maintenance, repair and remediation > Bridge strengthening
© 2012 www.DissertationTopic.Net  Mobile