Dissertation > Excellent graduate degree dissertation topics show

Study on heavy vehicle hydraulic retarder parameter optimization based on CFD

Author: YuGuoBao
Tutor: ZhouYunBo
School: Nanjing University of Technology and Engineering
Course: Vehicle Engineering
Keywords: Hydraulic Retarder Beam Theory Computational Fluid Dynamics TransientAnalysis Structure parameter optimization
CLC: U463.53
Type: Master's thesis
Year: 2014
Downloads: 22
Quote: 0
Read: Download Dissertation

Abstract


Heavy vehicle has been one of the most important transportation tools in our country, but it is very heavy、 has a big inertia and long braking length, it also often works on bad road conditions, so it is very hard to ensure vehicle’s safety and comfort performance when only using single service brake system. Research shows that heavy vehicles often combine the service brake system and the hydraulic auxiliary brake system together to ensure the braking performance, and it is also an important research field in the development of braking system. But hydraulic retarder’s development in our country is slower than developed countries, the design theory of which is far from mature and deep, this paper uses beam theory、 similarity theory and computational fluid dynamics methods to simulate the pressure fied、 relative velocity field and analysis braking performance of the hydraulic retarder.Study on the flow control equations in rotational coordinate and numerical simulation method in three-dimensional flow. use the Cartridge filtering model in LES and smargorinsky model to simulate the flow field inside the hydraulic retader; Research on the calculation method of coupled multi flow area, and choose the sliding mesh method to simulate the flow in the interface area.Use the similarity theory, the beam theory to analysis the internal flow field of circulating flow and braking torque, and build the theory model of the hydraulic retarder’s braking torque, then make sensitivity analysis of braking torque when blade angle varies.Simulate the inner flow field of hydraulic retarder under fully filled condition using LES model, analysis the transient changes in the interface of static pressure, velocity distribution, and simulate the inner flow field characteristics on different rotor speeds, analysis the static pressure distribution and velocity distribution on blade’s surface, predict the braking performance and validate it by experimental results.Analysis the flow field distribution and the braking performance which is calculated by using the CFD method, when a structural parameter varies. Set up a series of models about each structure parameters, analysis the flow pattern, pressure distribution and the braking performance, according to above results, get the relatively optimum model in the model list.

Related Dissertations

  1. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  2. Based on Pro/E Reconstruct Sprinkler Structure and Investigations on Internal Flow Characteristic of the Sprinkler by Numerical Simulation and Experiment Methods,TP391.72
  3. Numerical Simulation of Flow and Mass Transfer in Tubular Electrochemical Reactor for Organic Wastewater Treatment,X703
  4. Three-dimensional Stimulation about Outflow Coefficient of the V-Cone Flow Meter,TH814
  5. CFD Simulation of Liquid Flow Field on Commercial-scaled Double-Pass CTST Tray,TQ053.5
  6. Heat-fluid Coupled Analysis on Convection Heat Transfer and Temperature Field of Gears,TH132.41
  7. Research and Application on Interactive Data Analysis of Typical Features in CFD 3D Flow Field,TP391.41
  8. Fluid-structure Interaction and Its Application in Bridge Engineering,U441
  9. Quality Analysis on Air-Conditioning System and Compartment of CRH2 High-Speed Train,U270.383
  10. CFD Simulation of Impeller Internal Flow Field in Qingting External Pumps,TH311
  11. Coupled Calculation of Flow Field and Temperature Field during Dynamic Quenching Process,TG156.3
  12. Flow Field Simulation and Finite Element Analysis of Hydraulic Retarder,U463.5
  13. Flow Field Analysis of Oil Way and Transient Heat Transfer Analysis of Friction Plate in Wet Multi-plate Friction Clutch,TH133.4
  14. The Impeller Design of A Mini Lvad,R318.6
  15. Optimal Design of the Key Parameters to Rollin Mill Oil-film Bearing,TH133.3
  16. Computer Simulation and Optimization of Quenching Tank,TG155.31
  17. Analysis for Temperature Action and Wind Load Effect on a Large Storage Bunker of Cylinder Reticulated Shell,TU399
  18. Research on the Parameters Design of Hydraulic Retarder and Simulation for Vehicle Auxiliary Braking Performance,U463.5
  19. A Study into the Technology of Development of Hydraulic Retarder,U463.5
  20. Simulation Study on the Matching Performance of Heavy Vehicle and Hydraulic Retarder,U463.5
  21. Numerical Simulation on Hydrodynamic Performance of Flexible Blade Turbine,TV734.1

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Braking system > Downhill braking ( deceleration )
© 2012 www.DissertationTopic.Net  Mobile