Dissertation > Excellent graduate degree dissertation topics show

The Bauschinger Effect in Auto-body Forming and Its Influence on Springback

Author: ZhuangJingBiao
Tutor: LiuDiHui
School: Hunan University
Course: Vehicle Engineering
Keywords: Bauschinger effect Springback Tension-compression tests Isotropic-kinematic hardening coefficient Circular bending tests
CLC: U466
Type: Master's thesis
Year: 2013
Downloads: 31
Quote: 0
Read: Download Dissertation

Abstract


Strain hardening of mental in one direction reduces the yield stress in theopposite direction, the existence of Bauschinger effect plays a unique role on theaccuracy of the sheet metal forming simulation. Especially now extensive use of highstrength steels and aluminum alloys, makes springback phenomenon an increasinglyimportant issue, the accuracy of the finite element springback prediction is alsobecoming improve. In order to improve the prediction accuracy of springback it isnecessary to study the Bauschinger effect of materials.The research of Bauschinger effect on sheet metals materials has always been aproblem in academic circles, which result from sheet material under the compressionstate is instability and circular bending test can’t research the Bauschinger effect withaccurate greater strain. Such a device is designed and manufactured to avoid bendingof specimen in the compression process. With the device tension-compression testswere carried out and the stress-strain relationship in different pretension strain wereobtained, and the parameters of Bauschinger effect were calculated. The phenomenonof Bauschinger effect, such as the rounding of the reverse flow curve, yielding at lowreverse stresses and permanent softening were discussed.The material model parameters, which can describe the Bauschinger effect, isobtained by comparing the experiment results with simulation results. U-channelforming test of DC06and DP600was carried out. The influence of different materialmodels, which include the hardening laws of isotropic hardening, Isotropic-kinematichardening and kinematic hardening, on springback prediction was analyzed bycomparing the simulation results. The effects on the precision of springbackcalculation were discussed theoretically.Finally, in order to study the influence of cycle bending on springback, a set offree bending tool was designed. Three set of bending tests of sheet steels (DC06andDP600) were conducted. The experimental results were compared and analyzed by asimplified model to show the influence of Bauschinger effect on springback.

Related Dissertations

  1. Study of Material Removal Mechanism in Surface-contact Grinding,TG580.11
  2. Investigation of Bauschinger Effect of AZ31 Magnesium Alloy,TG146.22
  3. Research on AHSS Deforming Compensation Method Based-on Springback Curve,U465.11
  4. Mechanical Behavior of SiC/Al Metal Matrix Composites Considering Thermal Residual Stress,TB331
  5. Study on Plastic and Fatigue Behavior of Reactor Materials and Sealing Element,O346.2
  6. Automotive Body Panel Forming Analysis and Numerical Simulation,U466
  7. Numerical Simulation in Automobile Panel Shaping Technology and Experimental Research,TG386
  8. Research on the Springback of Bending in LY12 Aluminum Alloy Sheet,TG115.54
  9. The Control and Prediction of Springback during the Sheet-metal Stamping of Advanced High Strength Steel,TG386
  10. Springback Control and Technological Parameters Optimization for Auto Crossbeam Stamping Process,TG386
  11. Study on Springback Prediction of High Strength Strip Steel in Rollforming,TG335
  12. Study on New Shell Element and Application in Rollforming,TG386
  13. Rigid Element Analysis for Stamping Springback Simulation,TG386
  14. Experimental Research on Electromagnetically Assisted Bending of Aluminum Sheet,TG391
  15. Tube bender bending springback and Control System,TG386.31
  16. Research on the Springback Control Methods in High Strength Sheet U-shaped Parts Stamping Forming,TG386
  17. Study on Key Technologies and Applications of Springback Controlling-oriented in Precision Linear Guide Straightening,TG333.23
  18. Based on high- strength steel body structure design theory and application of critical,TG386
  19. Deformation Behavior and Mechanism of Electromagnetically Assisted Sheet Metal Stamping of 5052 Aluminum Alloy,TG386
  20. A Discrete Springback Compensation Algorithm for Stampings with Curved Surfaces Using Optical Measuring Technology,TG386
  21. Research on the Forming Limit and Springback Control of Numerical Incremental Sheet Metal Forming Technology,TG386

CLC: > Transportation > Road transport > Automotive Engineering > Automobile manufacturing process
© 2012 www.DissertationTopic.Net  Mobile