Dissertation > Excellent graduate degree dissertation topics show

Study on Forming Simulation and Springback Compensation of the Front-carling Inner Plate

Author: WuShanDong
Tutor: ZhouJie
School: Chongqing University
Course: Materials Processing Engineering
Keywords: the Front-carling Inner Plate springback springback compensation optimization simulation
CLC: TG386
Type: Master's thesis
Year: 2013
Downloads: 92
Quote: 0
Read: Download Dissertation

Abstract


The Front-carling Inner Plate is a typical U-shaped pieces. Its change of sectionheight is rapidly which has a high surface quality requirements and a complex shape. Inaddition，it exists local shaping feature. The Front-carling Inner Plate is commonlymanufactured by metal forming. It can be automated production，owing to its heightproduction efficiency and the production with a rather stable quality.Took the Front-carling Inner Plate of a new-style car as the object of the study，theresearch of the drawing、trimming deflashing、spring back calculation and spring backcompensation were done with the finite element software Dynaform. The primarycontents are as follows:①The finite element simulation model of the Front-carling Inner Plate was built.The stamping process was simulated，and the further optimization of its partial3Dmodel was done to prevent its fracture defect.②Taking the blank holder force、die clearance、friction coefficient、the raise of thedrawing velocity as the influential factors，an orthogonal experiment was designed. Theinfluences of the parameters in the thickness and in the springback were analyzed，andfind the best molding effect of the process parameters.③Based on the precise prediction of springback for stamping parts， theLS-DYNA software is used to achieve auto springback compensation to modify the dieshape by iterative algorithm， which makes the parts after forming can satisfy the shaperequirement after springback. This method is of significance to guide the industrypractical production.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  9. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  10. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  11. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  12. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  13. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  14. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  15. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  16. Reseach on Optimal Control of Elevator Group Based upon Ant Colony Algorithm,TU857
  17. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  18. Numerical Simulation of Biomass Direct Reburning,TK16
  19. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  20. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  21. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Cold stamping ( sheet metal processing) > Cold stamping process
© 2012 www.DissertationTopic.Net  Mobile