Dissertation > Excellent graduate degree dissertation topics show

Algorithm Research and System Development of High Strength Steel Springback Geometry Compensation Based on CATIA

Author: SunShiYan
Tutor: LiuYuQi
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: high strength steel springback compensation CATIA-SGCS surfacereconstruction parametric updating
CLC: U465.11
Type: Master's thesis
Year: 2013
Downloads: 13
Quote: 0
Read: Download Dissertation

Abstract


With the trend of automobile lightening, high strength steel has been widely used inautomotive body parts manufacturing. The mechanical properties of high strength steel isdifferent from ordinary low carbon steel, so the problem of springback appeared in thestamping production is very prominent, and it’s hard to be solved, which seriously impactson the car body processing and assembly. The control of high strength steel stampingspringback basically have two kinds of methods: one is the process control method, andthe second is geometry compensation method. The process control method can reducespringback to a certain extent, but it can’t eliminate the springback fundamentally, andmould surface geometry compensation method can theoretically solved the springbackproblem. In recent years researchers have proposed many effective compensationalgorithms to compensate mould surface, which are based on grid form. If mouldcompensation surface of3d geometric form can be quickly and accurately obtained, it willbe able to have important guiding significance in the high strength steel stampingproduction.This research is one part of National Science and Technology Major Project named:"Development of steel plate stamping simulation software and research of servo pressprocess and springback control"(NO.2010ZX04014-072). The paper has studied highstrength steel plate stamping springback geometric compensation algorithm, and based onCATIA V5platform developed high strength steel plate stamping springback geometriccompensation system, which can rapidly make springback geometric compensation formould surface.The paper briefly introduced the high strength steel and its production andapplication at home and abroad at present, compared and analyzed the advantages anddisadvantages of the springback control and compensation algorithms of the high strengthsteel stamping, proposed to develop stamping springback geometric compensation systembased on CATIA platform, which can directly make compensation for mould surface, andimprove the efficiency of the mould design. In order to make compensation for mouldsurface directly on CATIA platform, this paper puts forward a method based on UV line of rotation deformation springback geometry compensation algorithm. The algorithmdisperses surface using its original UV attributes, translates surface rotation deformationin three-dimensional space into discrete point rotation deformation in two-dimensionalplane through the section surface, and makes surface reconstruction with the direction ofthe original surface UV after discrete point deformation. In order to meet the stampingmanufacturability, this algorithm has also solved the transition surface processing and thespringback compensation correction problems. The paper further studies the surfacereconstruction technology and parametric association design technology; guarantee themould surface after springback geometry compensation can maintain the topologicalrelations and geometric continuity before compensation. Ultimately the paper fullyimplement the system function, and has developed high strength steel stampingSpringback Geometric Compensation System based on CATIA.CATIA-SGCS system makes full use of CATIA strong surface modeling function,can quickly get high quality mould geometric compensation surface, and keep thetopology relationship and surface continuity before compensation, which can be directlyapplied to the production practice. Based on a large number of analysis of high strengthsteel parts, the system is verified to be feasible and effective.

Related Dissertations

  1. Study on Cold-rolled and Annealing Process of Low-carbon High Strength Steel with Al,TG156.2
  2. Development of Hot-rolled and Ribbed Round Steel Bars 25CrMoA for Ultra-high Strength Oil Sucker,TG335.11
  3. Experimental Study on Machining Ultra-High Strength Steel 30Cr3SiNiMoVA by Milling Instead of Grinding,TG54
  4. Effects of Material Models on Springback Predictions and Compensations in Stamping Advanced High-Strength Steels (AHSS),TG386
  5. Research on Processing Parameter Optimization of High-speed Milling Ultra-high Strength Steel 30Cr3SiNiMoVA,TG54
  6. Design and Research of the Rotary Head Numerical Control Bending Wire Machine,TG305
  7. The Welding and the Welding Joint Residual Stress by FEM Analysis for DH40 High-strength Steel with Heavy Plate,TG404
  8. The Drawing Process Robust Planning and the Die Surface Compensation of the Automotive Wheel Cover by Numerical Simulation,TG386
  9. Study on the Welding Technology and Forming Performance of Multi-gauge High Strength Steel Laser Tailor-welded Blanks,TG456.7
  10. Research on the Laser-MAG Hybrid Welding Process of HQ785T1 HSLA Steel,TG456.9
  11. Truck hoardings of Forming and Spring,TG386
  12. Research on Wire Filling Laser Multilayer Welding for High Strength Steel Thick Plate,TG456.7
  13. High-strength steel double hot-wire multi- beam welding properties of tissues and joints,TG456.7
  14. High-intensity laser welded blank weld characteristics and rebound Prediction,TG456.7
  15. Research on AHSS Deforming Compensation Method Based-on Springback Curve,U465.11
  16. The Electrochemical Characterization of High-strength Steel during Corrosion Fatigue Crack Propagation,TG172
  17. Research of Large High Strength Apply on Large Equipment,TG172.9
  18. CO2 Laser Hybrid Welding of a 600MPa Low-alloyed High Strength Steel for Shipbuilding,TG456.7
  19. After high strength steel beams cars forming simulation and springback compensation research,TG386
  20. The Research on Stamping Springback Analysis and Application in Engineering of the Automobile,TG386
  21. Numerical Simulation of Laser-Arc Hybrid Welding,TG456.7

CLC: > Transportation > Road transport > Automotive Engineering > Automotive Materials > Ferrous metals > Steel, alloy steel
© 2012 www.DissertationTopic.Net  Mobile