Dissertation > Excellent graduate degree dissertation topics show

Research on the Intelligent Control System of Anchor and Mooring Winch

Author: WuLei
Tutor: ZhangYongLin
School: Jiangsu University of Science and Technology
Course: Control Engineering
Keywords: Constant tension PLC control Mooring system Tension allocation Quantumparticle swarm optimization
CLC: U664.42
Type: Master's thesis
Year: 2013
Downloads: 3
Quote: 0
Read: Download Dissertation

Abstract


Anchor and Mooring Winch is an important role on the safe operation of ship as one of the ship equipment. These equipments are proceeding large-scale with the increase of tonnage, and also the load is more and more big, requirements of the equipment are also getting higher and higher. The Control System of Anchor Windlass is a bit complicated. Ships will be subject to wind, waves, currents and inertia force of the hull when it was at anchor. Anchoring appliances should cooperate and control those external forces in order that ships can berth over the water or mooring at the pier safely and securely. Consequently, it has a very important practical significance to study of the electric drive and control of the Anchor Windlass.Anchor and mooring winch is one of important ship equipments, Three-Speed Anchor Windlass is widely used on ship. But the traditional control system of anchor windlass mostly realizes the system logic control with relay and contactor. This system is complexity connection、large volume、power consumption、poor reliability and changing the system difficultly. While PLC controller is introduced into the anchor and mooring winch system, that can greatly enhance the reliability of the system, and can be easily realized communications between a Master Computer and a Slave Computer, and is more convenient for monitoring running status of anchor and mooring winch.The main contents of the paper which are as follows:1) Function requirement of anchor windlass control system is studied, shortcomings of traditional control system of anchor windlass is analyzed. some methods to make up of the system inadequate of the traditional anchor windlass is putted forward, and give out the control system structure of anchor windlass.2) Two anchor windlass controller systems based on PLC is designed:System based on PLC&Three-Speed Electric Machinery、System based on PLC&Converter. Then analyze and compare the two systems.3) Mooring systems of anchor windlass is analyzes, so control system of anchor windlass is a bit complicated. Ship will be subject to wind, waves, currents and inertial force of the hull when it was at anchor, tensile forces will be changes largely that Causing marine drift.4) The programming tool SIMATIC Manager is Used to write and debug control system’s program, Drive Monitor is used to set converter parameters, and WinCC is usesed to design monitoring and operation interface.4) Three anchor system of the dredger is analyzed, QPSO (Quantum particle swarm optimization) method is usesed to solve the tension allocation, and simulates.

Related Dissertations

  1. Gantry planer simulation equipment design,TG551.2
  2. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  3. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  4. Research on Coupling Control Systems and Simulation for the New Vibratory Pile Driver,TU67
  5. The Design and Development of Sulfuric Acid-connecting Fuzzy Control System,TP273.4
  6. Automatic washing machine PLC control system design,TP273
  7. Research and Optimization of the Control System of COG (Chip on Glass) Equipment,TP273
  8. Coupled Analysis of Deep-sea Moored Floating Body and Research on Dynamic Characteristics of Mooring System,U674.381
  9. Research and Development on Software Control System of 300m~2 Sintering Machine,TP273
  10. Study of metal -organic chemical vapor deposition equipment control system,TN304.055
  11. 1500 m water depth tension leg platform motion and mooring Numerical and Experimental Study,U661.7
  12. Siemens PLC based automated warehouse system design and implementation,TP273
  13. Design and Implementation of Electrical Control System for Musical Fountain,TM571.61
  14. Single Point Mooring System Dynamics Modeling and Simulation and Research on Attitude Control,U664.82
  15. Fatigue Analysis of New-type Deepwater Mooring Systems,U653.2
  16. The Application and Research of PLC Computer Interlocking Control in Railway Signaling of the Jinduicheng Molybdenum,U284.362
  17. Research on the System of the Overhead Manned Equipment,TD52
  18. The Study on the Design of the Mooring System of Saucer-Like Wave Energy Converter,P743.2
  19. Designing and Application on Special Paper Machine Drive System,TS734
  20. The General Design of 150KW Tidal Current Power Station,P743
  21. Design and Research of the Turbine and Mooring System of Floating Station for Marine Current Energy Generation,P743.1

CLC: > Transportation > Waterway transport > Marine Engineering > Ship machinery > Deck machinery > Capstan
© 2012 www.DissertationTopic.Net  Mobile