Dissertation > Excellent graduate degree dissertation topics show

Study on Seismic Performance of the Steel Tube Filled with Steel-reinforced Concrete Composite Column

Author: LiMin
Tutor: LiuXiao
School: Shenyang University
Course: Geotechnical Engineering
Keywords: Steel tube filled with steel-reinforced concrete composite column Constraint effect coefficient Axial compression ratio Shear behavior Seismicperformance
CLC: TU398.9
Type: Master's thesis
Year: 2012
Downloads: 20
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of the city, natural disasters especially earthquake occursfrequently, building to the development of large space、 ultra-high-level direction,so people paymore and more attention to the structural requirements of the building. A large number ofearthquake disasters displayed that it is the collapse of the housing that directly causing casualtiesand economic losses.Bearing column is a main building of the force member which determinewhether the building can be collapsed under the earthquake. Therefore, the columns under highaxial compression ratio conditions should meet the requirements of good carrying capacity andductility. Steel tube filled with steel-reinforced concrete composite column integrated theadvantage of steel concrete columns and steel reinforced concrete columns, further optimize theforce performance of the columns and meet the development needs of modern structure. Theresults show that the capacity of strong axis loading is higher than the weak axis, improving thestrength of concrete, the capacity is not obvious improved, increasing constraint effect coefficientand the yield strength of the steel can improve the bearing capacity of the component, increasingaxial compression ratio and shear span ratio will reduce the carrying capacity of the member.Using ABAQUS finite element analysis software to do the following research of the steeltube filled with steel-reinforced concrete composite column. On the basis of past research,simulate the axial compression test and derivate the theoretical formula of the axial compressivebearing capacity based on the general theory, then compared the calculated value and experimentalvalue, the results showed that calculation value have a good agreement with the theoretical value.Select weak and strong axis loading, concrete strength, constraint effect, steel yield strength，axial compressive ratio and shear-span ratio as the change of component parameters to analysisthe shear performance of steel tube filled with steel-reinforced concrete. Using stress cloudimages to analysis every stages of the shear stress mechanism. Select constraint effect coefficientand axial compression ratio as factors to simulation analysis the seismic performance of thecomponents. The results show that the load-displacement hysteresis curve of the components arestable and full. From the skeleton curve, get that improve constraint effect coefficient and reduce axial compression ratio can improve the seismic capacity, energy dissipation capacity and ductility,and the higher of axial compression ratio the faster of ductility declined. With the constraint effectcoefficient increases and axial compression ratio decreases, the stiffness degradation and strengthdegradation are getting smaller and smaller.

Related Dissertations

  1. Research on "Strong Column Weak Beam" Yield Mechanism Factors of Reiforced Concrete Frame Structure,TU375.4
  2. Nonlinear Finite Element Static Analysis on Reinforced Masonry Shear Wall,TU364
  3. Static Properties Analysis of the ZW Wall Based on ANSYS,TU398.2
  4. Seismic Behavior Research of the Superimposed Slab Shear Walls for Different Axial-load Ratios,TU352.11
  5. Disease Analysis and Reinforcement Technology Research of the Concrete Structure,TU746.3
  6. Ductility Analysis of R.C. Special-shaped Columns with Thick Leg,TU323.5
  7. Design Method Analysis of the Load-Bearing Capacity and the Ductility of Special-Shaped R.C. Columns,TU311
  8. Short pier shear wall Seismic behavior research and injury analysis,TU973.31
  9. Experimental Study on Monotonic Shear Behavior and Cyclic Volumetric Strain Increase Pattern of Saturated Sand,TU441.4
  10. Experimental Study and Theoretical Analysis on Strengthening for Chinese Ancient Timber Buildings,TU366.2
  11. Study on Comprehensive Technology of Ultra-thin Asphalt Surface Functional Layer on Cement Concrete Pavement,U416.216
  12. Research on Seismic Performance of Post-tensioned Segmental Steel Fiber Reinfoeced Concrete Column,U443.22
  13. Study on the Failure Mode of Frame Structure under Earthquake Action,TU323.5
  14. Study on Seismic Performance of CFST Frame-Core Wall Structure with Dissipation Devices,TU398.9
  15. Failure Mode Optimization and Damage Control of Tall Building Structures under Seismic Excitations,TU973.2
  16. Experimental Studies on Steel Encased Transfer Beam and SRC Column Connections,TU398.9
  17. Study on Seismic Performance of RC Column with High Compressive Ratio Retrofitted by Prestressing Steel Strips,TU352.11
  18. Study on Rational Structural Design and Seismic Performance of New Staggered Truss Structure,TU391
  19. Shear Capacity Analysis of Assembled Monolithic Precast Prestressed L-shaped Short Shear Wall,TU398.2
  20. Study on the Impact of the Seismic Performance on the Grounding Mode for Structures Supported by Foundations with Different Locations,TU399
  21. Study on the Seismic Performances of500Mpa Reinforced Concrete High-rise Multiple Tube-Frame Structure,TU973.31

CLC: > Industrial Technology > Building Science > Building structure > Composite structure > Other composite structures
© 2012 www.DissertationTopic.Net  Mobile