Dissertation > Excellent graduate degree dissertation topics show

The Research on Design Optimization of Single-storey Steel Structure Industrial Buildings

Author: HeWenTao
Tutor: HouZhaoXin
School: China Metallurgical Group Architectural Research Institute
Course: Structural Engineering
Keywords: single-storey steel structure industrial buildings simple plane designmethod laced columns longitudinal wind load trimmer beams rigidity value of elastic support
CLC: TU391
Type: Master's thesis
Year: 2012
Downloads: 29
Quote: 0
Read: Download Dissertation

Abstract


Compared with traditional industrial buildings, modern industrial buildings changed a lot. In the design of modern industrial buildings, the sinple plane method is widely used. However, there exists many defects in sinple plane design method, which lead to safety and economical efficiency problems. Therefore, it is necessary to make comprehensive and detailed analyses of these defects to improve the design of industrial buildings.This paper explored three problems in the simple design method of single-storey steel structure industrial buildings. Firstly, this paper put forward proper design methods of laced columns with access hole or bending moments in single chords. Secondly, it discussed on how to take consider of longitudinal wind load on the end plane frame. Finally, it concluded calculation methods of rigidity value of elastic supports which are eguivalent to trimmer beams or brackets in simple plane design method.

Related Dissertations

  1. Double-column steel pipe concrete piers and reinforced concrete cylindrical stability studies,U448.34
  2. Nonlinear Analysis and Experimental Research on Performance of High-Pier with Concrete Filled Steel Tube Laminated Laced Columns,U443.22
  3. Study on the Overall Stability of Axially Compressed Built-Up Steel Columns with Batten Plate,TU391
  4. Research on Correlation Curves between Axial Force and Bending Moment of CFST Laced Columns and Truss Arches,TU398.9
  5. Studies on the Seismic Performance of Four-tube Concrete Filled Steel Tubular Laced Columns,TU398.9
  6. Research on the Mechanical Property of Concrete Filled Steel Tubular Laced Column,TU398.9
  7. Stability studies of concrete filled steel tubular ( single limb , two limbs ) column,TU398.9
  8. The Seismic Behaviors of Concrete Filled Steel Tubular Laced Columns-composite Box Girder Joint,TU398.9
  9. Experiment and Research on Concrete Filled Steel Tubular Laced Columns Under Axial Compression,TU398.9
  10. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  11. Stress Analysis of Long0-Span Lattice Grid Bearing Crane Beam,TU391
  12. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  13. Study on Secondary Stress and Numerical Analysis of Parallel Chord Steel Truss Bridge,TU391
  14. A Comparative Study on Design Method of Frame Column,TU391
  15. Test and Theoretical Analysis of Joint with Semi-rigid Connections,TU391
  16. The Research on Mechanical Properties of CFRP Plate Reinforcing Steel,TU391
  17. Modern architecture bolted and welded steel welding stress and deformation of,TU391
  18. The Construction Mechanics Study of the Long-Span Steel Truss Roof Above the Stage in a Zone of Phoenix Valley,TU391
  19. Analysis and Experimental Study of steel staggered truss structure under lateral force resisting response to fire,TU391
  20. Study design techniques stiffened steel plate shear wall considering vertical load,TU391
  21. Research on Seismic Behavior of Semi-Rigid Connection Steel Frame with Cross-stiffened Steel Plate Sheer Walls*,TU391

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Steel
© 2012 www.DissertationTopic.Net  Mobile