Dissertation > Excellent graduate degree dissertation topics show

Experimental Study on Modification and Thermal Conductivity of Rubberized Mortar

Author: ChenJianYin
Tutor: ZhangYunLian
School: Zhejiang University of Technology
Course: Structural Engineering
Keywords: rubberized mortar modifying process ball milling silanecoupling agent coefficient of heat conductivity
CLC: TU578.1
Type: Master's thesis
Year: 2013
Downloads: 9
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of the automotive industry, the processing of waste tire crumb rubber has become increasingly the focus of attention. Waste tire rubber powder can not only improve impact toughness, crack resistance, frost resistance and carbonation resistance of the cement-based materials, but improve the sound insulation insulation properties of cement-based materials. The application in cement-based materials is becoming one of the effective recycling ways of waste tire rubber powder.In this paper, the research work was mainly on the effect of fineness and dosage of waste crumb rubber on the strength and thermal conductivity of cement mortar. With the increasing of rubber content, the compressive and flexural strength of mortar decreased in different degrees. Modification methods such as using NaOH solution, adding silica fume instead of partial cement as well as milling crumb rubber with silane coupling agent (mechano chemical method) were used. The results showed that:(1) The compressive and flexural strength reduced with the increasing of dosage of crumb rubber, but turned higher for the specimens with coarse crumb rubber. (2) The strength of mortar was improved by the modifying methods, immersing the crumb rubber in NaOH solution and mixing silica fume partially instead of the cement(3) After mechano-chemical modification, the strength of rubber mortar showed a of increasing first and then decreasing with the dosage increasing of coupling agent, which was higher than those only with coupling agent but no ball milling. In the meantime, ball milling time has little effect on the strength of mortar.(4) Four kinds of waste tire crumb rubber with different fineness were used to partially replace fine aggregate in mortar specimens. The thermal conductivity of rubberized mortar with four kinds of waste tire crumb rubber were separately tested. It indicated, with increasing dosage of crumb rubber, the heat-conduct coefficient of rubberized mortar decreased and the thermal insulation performance was improved.

Related Dissertations

  1. Preparation and Characterization of Luminescent Materials BaWO4:Eu3+,TB383
  2. Preparation and Properties of ZAO Target,TB383.1
  3. Preparation and Characterization of Nano-sized TiO2 Powder and Ceramics,TB383.1
  4. Preparation and microstructure, mechanical properties WC/Al203-Cr-Mo-Ni cermet,TG148
  5. Preparation and Properties of a Al-based Bulk Amorphous Alloy by Powder Metallurgy,TF125.22
  6. Structure and Magnetic Properties of FeCuNb (Ti) SiB,TG139.8
  7. Influence of Metal Impurity Doping on the Mechanical Property of Alumina Dispersion Strengthened Copper Alloys,TG146.11
  8. Investigation on the Phase Structure and Hydrogen Storage Characteristics of Ball-milled Mgx Ni100-x （x=70、60、50） Composite Hydrogen Storage Material,TG139.7
  9. Mechanical Alloying gold-tin alloy,TG425
  10. Study on Controlling Preparation of Carbon/Megnesium Hydrogen Storage Materials and Dehydrogenation Kinetics,TB34
  11. The Study on the Properties of Fiber Reinforced Mortar Mixed with Modified Waste Rubber Power,TQ177.6
  12. The Fabrication and Superelasticity of Biomedical Porous Ti-Nb Based Alloys,TG146.23
  13. Hydrogen Storage and Electrochemical Properties of Vanadium Alloy/rare Earth A2B7 Alloy Composite Electrode Material,TG139.7
  14. Iron-rich composite absorbing material Cenosphere Preparation and Properties,TB34
  15. Preparatrion of Magnesia Micro-powder in Planetary Ball Mill by Adding Organic-grinding Aid,TB383.3
  16. Microstructure and Mechanical Properties of TiC Ceramic Coating Fabricated by High Energy Ball Milling Technique,TG174.4
  17. Ultrafine grain growth inhibitors on WC-Co Cemented Carbide,TG135.5
  18. Nano silver inorganic antimicrobial agents on room temperature curing PMMA material and mechanical properties of antibacterial research,R783.1
  19. Effect of Grain Inhibitors on Microstructure and Mechanical Properties of WC-Based Cemented Carbides Prepared by SPS,TG135.5
  20. Milled metallic glass strip under plastic deformation,TG139.8
  21. Synthesis and Characterization of Graphitic Carbon Nitride,TB383.1

CLC: > Industrial Technology > Building Science > Building Materials > Waterproof,moisture-proof material,caulking,sealing materials > Caulking , sealing materials > Mortar
© 2012 www.DissertationTopic.Net  Mobile