Dissertation > Excellent graduate degree dissertation topics show

Research on the Rock-breaking Characteristic and the Layout of TBM Gage Disc Cutter

Author: WuYuan
Tutor: XiaYiMin
School: Central South University
Course: Mechanical Engineering
Keywords: TBM gage disc cutter installation angle kinematics rock-breakingcharacteristics layout
CLC: TU621
Type: Master's thesis
Year: 2013
Downloads: 60
Quote: 0
Read: Download Dissertation

Abstract


In recent years, the TBM tunneling technology had been developed rapidly. It is widely used in many engineering projects, such as the water conservancy and, hydropower, and transportation, as well as municipal and national defense. Therefore, the demand of TBM increases significantly. The rock-breaking feature of disc cutter has become the key issues of the TBM technology, because it is directly related to disc cutter’s design and its layout method, which has direct effects on the quality and cost of tunneling. Therefore, on the basis of consulting a large number of domestic and foreign literatures, the gage disc cutter’s motion characteristic and rock-breaking characteristics and layout have been investigated in this paper. The main conclusions are as follows:(1) The disc cutter’s rock-breaking process and stress state are analyzed, and the kinematic equation of gage disc cutter is established. Finally, then the motion characteristics of gage disc cutter are analyzed obtained, which can be as a theoretically guide for the further study of rock properties and cutter layout.(2) The numerical model for rock-breaking with the gage disc cutter is established. The rock propagation process due to the effect of gage disc cutter is simulated. Then, the single-factor influence of the rock type, blade angle, blade width, the edge of the cutter installation angle and the cutterhead’s over-arc radius on the rock breaking are studied. In addition, the coupling impact of the factors on rock breaking efficiency for the gage disc cutter by orthogonal tests is analyzed.(3) The rock breaking process of the transition cutter under the different installation angle is simulated. Then, the cutting force of gage disc cutter and rock crushing characteristics are analyzed. According to the principle of minimum specific energy, the optimal installation angle is determined. The correctness and feasibility of the numerical method is verified by experimental test results.(4) An optimization model has been built established for gage disc cutters’layout. Then, the optimization layout parameters of TBM are obtained according to the Genetic Algorithm. Finally, the static performances of the cutterhead before and after the optimization layout are compared and the results show that the strength and stiffness of the optimized cutterhead have been improved. The layout of gage disc cutters plays an important role in cutterhead performances.

Related Dissertations

  1. Facility Layout Plan and Optimization of Chemical Factory,TQ08
  2. Research on Key Technology of Recycling Horizontal Subsea Pipe Conector,TE973
  3. Urban Culture and Metropolitan Studies,G216.3
  4. Port industrial zone planning and layout of the sewage treatment system,X703
  5. Construction of an integrated large-scale feed mills with an annual output of 170,000 tons integrated feed mill design and construction,S816
  6. Optimization Research on the Industrial Structure and Space Layout of Guangxi Beibu Gulf Economic Zone under the Perspective of Low-Carbon Economy,F205
  7. Study of Production Potential and Zoning Plant of Rice in Hubei Province Using GIS,S511
  8. Design and Performance Simulation Research of the Reconfigurable Mobile Wheel-armed Robot,TP242
  9. Load Spectrum Complication of Disc Cutter of Full Face Rock Tunnel Boring Machine,U455.3
  10. The Kinematics/Elasticity Kinematics Analysis and Optimization of Multi-link Suspension System,U463.33
  11. A Study of Wei Litong’s Yi-ology,B249
  12. Study on Layout of Shear Walls in Frame-shear Wall Structures with L-shaped Plane,TU398.2
  13. Research of the Knowledge-based Fine-blanking Process Planning System,TG386
  14. Research on Industrial Layout and Countermeasures of Internet of Things of China,F49
  15. Key Technology on Intelligent Ship General Layout Design,U662
  16. Virtual Prototype Modeling and Kinematic and Dynamic Analysis of Self-Walking Gantry Construction Robot,TP242
  17. Research on Computational Approach to the Layout Optimization Problems in Satellite Capsule,TP301.6
  18. Polycentric city tour of the main road network layout,U412.1
  19. Shield tunneling process automatic tracking control technology,U455.3
  20. TBM cutterhead system synchronization driven research,TM921.48
  21. Layout Pattern and Opposition-based Cooperative Co-evolutionary Differential Evolution Algorithm and Application,TP301.6

CLC: > Industrial Technology > Building Science > Construction machinery and equipment > Earthwork machinery, mining machinery > Excavator
© 2012 www.DissertationTopic.Net  Mobile