Dissertation > Excellent graduate degree dissertation topics show

Stress and Thermal Analysis and Preliminary Design of the In-vessel RMP Coils in HL-2M

Author: ZuoYiShun
Tutor: LiQiang
School: Huazhong University of Science and Technology
Course: Electrical Engineering
Keywords: HL-2M tokamak Resonant magnetic perturbation (RMP) coils Finite element analysis
CLC: TL622
Type: Master's thesis
Year: 2013
Downloads: 1
Quote: 0
Read: Download Dissertation

Abstract


HL-2A，which is a copper conductor tokamak directed by Southwestern Institute ofPhysics (SWIP), is being modified as HL-2M. HL-2M will inherit and make full use of theconditions in HL-2A. In order to get the plasma with higher beta, longer energyconfinement time and higher bootstrap current, the auxiliary heating power in HL-2M willbe up to20MW, which makes easier to explore the reactor relevant regimes with highplasma core confinement.In order to control and study high performance and high parameter plasma, in-vesselresonant magnetic perturbation (RMP) coils are proposed for the design of HL-2Mtokamak to suppress MHD instabilities, such as edge localized mode (ELM）andresistance wall mode (RWM). The coils could also be used to compensate error field toimprove plasma confinement. Each coil is to be fed with a current up to5kA, operatedwith a frequency range of dc to about1kHz. Two set of coils (1×6,1×18) are arranged intoroidal rows in the upper half of the VV, and the in-vessel RMP coils are symmetricallylocated in the upper and lower halves. The support, insulation and vacuum sealing in avery limited space are crucial issues for designing in-vessel RMP coils, and the coils mustwithstand large electromagnetic (EM) and thermal loads. In this paper, the structure,support, insulation and vacuum sealing of the in-vessel RMP coils for HL-2M areintroduced. Finite element calculations are performed to optimize the support byminimizing stress caused by EM forces on the coil conductors, then the minimum stress isused to check the strength and get the life time of the coil. The temperature rise occurringon the coil in normal working condition and300℃baking condition are worked out, andcorresponding thermal stresses caused by thermal expansion of materials are evaluated tobe allowable. The times that take to cool down the coils in different working conditionsare also discussed.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. Study of the Tunnelling Laneway Drilling and Anchor Rope Installation Device,TD353
  10. Study on Mechanical Property of Plug-pin Steel Tube Scaffold Platform,U673.3
  11. Virtual Prototype Realizing and Performance Research of Longitudinal Roadheader,TD421.5
  12. Research on Optimum Design of Plantary Gear Transmission Mechanism for Cutterbar,TH132.41
  13. The Structure Analysis and Optimization of Casey Green Laser Emission Dishes Support Bracket,TH743
  14. The Influence of Frame Structure Local Column Failure on Overall Performance,TU375.4
  15. Study of the Full Hydraulic Track Movable Power Station,TM624
  16. A strong dynamic load mechanical holder dynamics simulation and finite element analysis,TJ03
  17. TVM subway ticket design and analysis of the transmission device,U293.22
  18. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  19. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  20. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  21. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391

CLC: > Industrial Technology > Nuclear technology > Controlled thermonuclear reactions ( fusion reaction theory and experimental facilities) > Fusion engineering and technical > Magnets, coils and magnetic fields
© 2012 www.DissertationTopic.Net  Mobile