Dissertation > Excellent graduate degree dissertation topics show

The Fault Simulation and Research of Doubly-fed Wind Generation Drive Chain

Author: MengQingChun
Tutor: ShiXianJiang
School: Harbin University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: Double fed wind generator Gear fault Simulation Sensorlessdiagnosis
CLC: TM315
Type: Master's thesis
Year: 2013
Downloads: 16
Quote: 0
Read: Download Dissertation


Domestic electric energy consumption is growing exponentially with therapid development of technology and the progress of society. Under the premiseof protecting the environment seeking safe, clean and efficient power supplies isan urgent issue for china and even the whole world. The numbers of wind powergenerators are increasing rapidly in recent decades, because the wind powergeneration is becoming a kind of renewable energy technology having anattention of some countries in the world. Due to the wind power generation filedlocated distantly and some regular sensors of them installed and repaireddifficulty it is urgent to research a convenient and comprehensive approach.Through the computer simulation and lab experiments of double fed windpower system, by using analysis of stator current method, a sensorless faultdiagnosis technology for wind power generation sets fault is presented in thisarticle and it is proved efficient and practicable by simulation experiments.Matlab/Simulink software is used to simulate the double fed wind generator,setting the system working in normal and fault situations, and comparativeanalysis the collected voltage, current and torque signals of the stator and rotor.Then a double fed wind generator simulation experiment is made according tothe laboratory condition. Double squirrel-cage asynchronous motor is used tosimulation the characteristic of the wind wheel, wound rotor asynchronous motorequivalent to as generator and two motors connect with overdrive gear.Frequency converter is used to adjust the generator rotor excitation current.Motor load current signal from current transformer induction is connected tosignal acquisition board, and computer software is used to complete the spectrumanalysis.It is proved by the simulation and experiment result that the test bench cansimulate the different conditions and faults of double fed wind generator. Thecollected stator current signal of the load circuit has the fault part, it mean the feasibility of sensorless fault diagnosis technology in wind turbine faultdiagnosis.

Related Dissertations

  1. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  2. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  3. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  4. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  5. The Research of Fault-Tolerant Techniques for Parallel/Distributed Network Simulator PDNS,TP302.8
  6. Research of Visualization Technology in the Virtual Test of Missile,TP391.9
  7. Mechanism Design and Kinematic Simulation of a Celiac Invasive Surgical Robot,TP242.3
  8. The Study of Dynamic Simulation of the Passive Dynamic Quasi-Quarupedal Walker,TP242.6
  9. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  10. Physical Fields’ Characteristic Study & Structural Optimization of a SCR Denitrification Reactor,X773
  11. Soil Erosion Simulation in Hilly Area of South China,S157
  12. Modeling Genotype by Climate Effect on Wheat Prductivity,S512.1
  13. Changchun High- temperature low-pressure ridge containing wax reservoir development and technological measures,TE349
  14. The Analysis Research and Design of Backstop Roller Based on Virtual Prototype Technology,TH222
  15. Numerical Simulation Study on Characteristics of the Single/Double Ground Effect for Bionic Wing Propeller,U664.3
  16. Study of the TCR+FC Static Var Compensator Based on DSP,TM761.1
  17. The Mathematical Model and Study of Decision-making on Optimal Allocation of Water Resource of Shiyang River Basin,TV213.4
  18. Research on the Technology of Waiting Pressure When Passing Through Abandoned Roadway in Fully-Mechanized Face with Anual Coal Production of 10 Million Tons,TD823
  19. Research of Millimeter Wave Radar Depth Indicator for Mine,TD534.6
  20. TVM subway ticket design and analysis of the transmission device,U293.22
  21. Research on CNC Milling System,TG547

CLC: > Industrial Technology > Electrotechnical > Motor > Generators, large the generator group ( Zonglun,) > Wind turbines
© 2012 www.DissertationTopic.Net  Mobile