Dissertation > Excellent graduate degree dissertation topics show

Battery Monitoring System of the Wireless Terminal on Car GPRS

Author: LiZuoLei
Tutor: XuJun
School: Harbin University of Science and Technology
Course: Pattern Recognition and Intelligent Systems
Keywords: Battery Monitoring CAN Bus GPS Positioning GPRS NetworkTransmission
CLC: TM912
Type: Master's thesis
Year: 2013
Downloads: 0
Quote: 0
Read: Download Dissertation

Abstract


Energy problem is being attracted attention by more and more peoplenowadays. People all over the world are expecting the new source of energywhich is energy-saving and environmentally friendly. The emergence of electricvehicles becomes inevitable trend. So the battery problem is paid great attentionabout how to use it properly at home and abroad. Now, the management of thebattery is still not perfect, so battery monitoring system of car General PacketRadio Service is researched and developed.Battery monitoring system consists of lower machine that is installed on theelectric vehicles and upper machine which is composed of analysis software ofthe remote monitoring center on computer. Upper machines and lower machineshave a clear division of responsibilities, the various batteries and the informationof vehicles position are displayed by graphical interface, they make themonitoring of cars and batteries use more reasonably. STC12C5A60S2is the corecontroller of Upper machines, it transmits the information of the battery back tothe controllers through CAN bus, analysis and storage it. At the same time, itreceives signals from space satellite positioning through Gstart-GS-92-m-Jpositioning chip, and receives these signals through the terminal of the controller,and store these positioning data by anglicizing and sorting in the controller.Finally you can connect General Packet Radio Service network by SIM300andsend the battery data which was stored just now and satellite data to the uppermachines in faraway places change these data into graphics on the uppermachines. The graphics can make you see the state of batteries and cars clearly atthat time. The upper machines are the display software that is compiled by VC++and the various data from the lower machines is evolved into graphics.The research and development of this system has reached the goal includingthe low cost, high reliability, simple hardware environment and short development cycle. So people has collected relevant data on-board test stage andMonitored the batteries, and achieved their goals.

Related Dissertations

  1. The Inductive Load Based Vehicle Body Network Control System,U463.6
  2. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  3. Design of LXI 1553B Bus Communication Module,TP273
  4. Design of the Main Controller in Automotive Body Network Control System,TP273
  5. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  6. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  7. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  8. The Dynamic Monitoring System of Gold Mine Roof Based RS-485 Rus,TP274
  9. The Application of C8051F310 Single-Chip to Improve the Braking Safety of Mine Hoist,TP368.1
  10. Research PXI bus -based projectile speed module,TJ410.6
  11. The Study on Site Selection Methods about Bus Transfer Hub at Cross-Harbor Tunnel in Qingdao,U491.17
  12. Development and Application of Electronic Vehicle Controller Unit for a Hybrid Electric City Bus,U469.7
  13. A Study of the History of the Five Tribes of GaoGouli,K289
  14. The Study Intelligent Pressure Transmitter Based on Hart Protocol,TP212.6
  15. Research of the Temperature Fuzzy-PID Control Algorithm and Design the Control System of Well Type Resistance Furnace,TP273
  16. Research Baotou City taxi industry business model,F572.88
  17. Intelligent management system for electric vehicle charging,U469.72
  18. Enterprise Service Bus Based Information Integration System for Die & Mold Enterprises,TP311.52
  19. Interface Driver Design and Realization of Mutiple-dsp Parallel Processing for Route Planning System,TP368.12
  20. Design and Realization of Controllable Measuring Force Profilometer,TP212
  21. The Design and Application to Multi-axis Synchronization Control System Based on CPCI,TP273

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Battery
© 2012 www.DissertationTopic.Net  Mobile