Dissertation > Excellent graduate degree dissertation topics show

Research on Data Acquisition System of Can Bus

Author: HuQingHua
Tutor: LiuShuChang
School: Changchun University of Science and Technology
Course: Electronic Science and Technology
Keywords: CAN bus data acquisition S3C2440A multiple master-structure
CLC: TP274.2
Type: Master's thesis
Year: 2013
Downloads: 1
Quote: 0
Read: Download Dissertation

Abstract


In order to replace the traditional vehicle of point to point single communication mode, to satisfy the requirement of real-time system, to realize data sharing, the German BOSCH company has developed the CAN technology used in automobile.The use of CAN bus reduces the number of signal lines of each node, and reduces the system detects, repair costs, thus increases overall system performance. At the same time as the CAN bus has multiple master, a master multiple slave network characteristics, it constitutes a system of flexible, has stable data transmission rate, high reliability, it can satisfy the real-time requirement.CAN bus data acquisition system based on CAN bus is introduced in detail, and the characteristics of CAN bus data acquisition system hardware and software design. This paper uses S3C2440A as microprocessor, through the CAN transceiver receives role, to control the CAN controller in bus data acquisition, and datas obtained through liquid crystal or serial are displayed, not only greatly enhance the performance of the whole system, but also reduces the cost of system. Programme after minor modifications, can also be applied to the information home appliances, consumer electronics, medical research and other fields, therefore it has a broad application value.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Research on the Aiming Signal Processing of the Optical Probe Measurement System,TH74
  3. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  4. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  5. Study on the Locomotive Dynamic Supervision System,U284.48
  6. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  7. The Inductive Load Based Vehicle Body Network Control System,U463.6
  8. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  9. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  10. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  11. Design of High-Speed Data Acqusition Board Based on Signal Integrity Analysis,TP274.2
  12. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  13. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  14. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  15. Development of the Digitizer Based on PCI-E Bus,TP274.2
  16. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  17. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  18. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  19. The Principle Research and Implement of the Acoustic Keyboard for Computer,TP334.23
  20. Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3
  21. Reform of the civil service positions Consumption,D630

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile