Dissertation > Excellent graduate degree dissertation topics show

Research on Some Problems of Compact Pulsed Power Supply

Author: ShiXiangYu
Tutor: LinFuChang
School: Huazhong University of Science and Technology
Course: High Voltage and Insulation Technology
Keywords: Pulse power source Shear strength and tensile strength Surface flashover invacuum Shielding of plasma Induced coupling current Grounding
CLC: TN86
Type: Master's thesis
Year: 2013
Downloads: 8
Quote: 0
Read: Download Dissertation

Abstract


With the development of high power switches and high energy capacitors, the compact pulse power source is widely used nowadays. The reliability of compact pulse power source applied to specified conditions has been paid tremendous attention. For example, the deformation of conducting bars under the electric force and the surface insulation which is disturbed by the plasma in vaccum may reduce the reliability.This article adoptes an approach coupled with simulations of the conductivity current, the magnetic-field and the structure together to investigate the deformation of conducting bars. Resultant force of conducting bars is calculated by the method of the virtual work. The shear strength and the tensile strength of steel studs that connect conducting bars are checked based on the result of the resultant force. The second part of this article elaborates the research status of the surface flashover which influence reliability of the insulation performance in vaccum. Moreover, it has been illustrated that the process of the surface flashover which is disturbed by the plasma on the basis of the SEEA theory,. The experiments indicate that the influnce of the plasma current pulse width on the surface flashover voltage is feeble. According to the experimental results, a series of insulated boxes for shielding metal electrodes from plasma are designed, and one kind of design is most effective for shielding plasma. On the aspect of electromagnetic compatible, the distribution of induced current and induced voltage are measured, and the induced current flow on the support frame is calculated base on partial element equivalent circuit. Experimental results demonstrate that the pulse power source will still operate normally without grouding.

Related Dissertations

  1. Research of Wire Cut Electrical Discharge Machine Control System Based on ARM,TG484
  2. Research & Development of Small Current Grounding Fault Diagnosis of Electric Power Distribution Network and Its Application,TM862
  3. Design and Research on Pulse Power Used for Sewage Treatment by Plused Arc Electrohydraulic Discharge,U664.9
  4. Research of A Practical Nanosecond High-voltage Pulse Power Source,TM46
  5. A New Passive Fault Indicator for Locating Insulator Flashover,TM73
  6. Grounding System and Its Anti-corrosion in Power Plant,TM862
  7. Studies of DC System Grounding Fault,TM862
  8. Study on Thermal Stability and Influence under Certain Conditions on Convertor Station Neutral-Bus of Grounding Electrode in HVDC,TM862
  9. Based on morphological analysis of small current grounding fault identification technology and engineering,TM862
  10. Research on Corrosion Diagnosis of Substation Grounding Grid and Its Influence Factors,TM862
  11. Discourse Functions of English Restrictive Relative Clauses,H315
  12. Application and Research of Supple Network Automation System in Chemical Enterprise,TM727.3
  13. Study of Capacitive Current Compensation in Cable Distribution Networks,TM714.3
  14. Optimization Design of Grounding Grid for Hengshui District,TM862
  15. The Application and Research on Corrosion Prevention of Substation Grounding Grid Based on Cathodic Protection Principles,TM862
  16. The Damage Mechanics of Ship Hard Grounding,U698.6
  17. Study of Online Location Method of Single Phase Grounding Fault for Power Cable,TM755
  18. A Cognitive Study on the Subjectivity of Deixis,H314
  19. A Study of V-ing Ambiguity in Grounding Theory,H314
  20. The Corrosion Break-point Diagnosis Method of Grounding Grid Based on the Principle of Uniting Magnet Field and Electric Circuit,TM862
  21. Soil Accelerated Corrosion and Protection of Grounding Net,TG172.4

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Radio equipment,telecommunications equipment > Power supply
© 2012 www.DissertationTopic.Net  Mobile