Dissertation > Excellent graduate degree dissertation topics show

Study of Succinic Anhydride Prepared by Selectivity Catalytic Hydrogenation of Maleic Anhydride

Author: TianWeiPing
Tutor: ShiLi
School: East China University of Science and Technology
Course: Chemical processes
Keywords: maleic anhydride clay succinic anhydride hydrogenation nickel
CLC: TQ225.23
Type: Master's thesis
Year: 2012
Downloads: 145
Quote: 0
Read: Download Dissertation

Abstract


In this paper, succinic anhydride preparation acted as the target reaction by selectively catalytic hydrogenation of maleic anhydride, Lin’an clay, E-zhou clay and Yixian clay as catalyst supporters, respectively. A series of catalysts probing into the target reaction were obtained with main active ingredient of Ni and doped reagent of different content such as Pt, Pd, Co and Cu. In the fixed-bed micro-reactor for catalytic reaction, the catalyst supporter, active ingredients, preparation conditions and reaction conditions were optimized screening. These catalysts were characterized by X-ray diffraction (XRD), H2 temperature programmed reduction (TPR) and thermogravimetric analysis (TGA) spectroscopy. The results show that the 5%wtNi/Lin’an clay catalysis prepared by impregnation has high catalytic activity. The active ingredient of Ni was present as NiO on the support. Too much of the calcination temperature will lead to the destruction of the support structure, the hydrogenation of MA showed that the catalyst calcined at 550℃gave the best results. By increasing the H2/MA molar ratio and/or increasing the H2 pressure and/or increasing the reaction temperature can improve has deactivates the activity of catalysis. Study on catalyst stability period demonstrated that whether the stability period existence or not was determined by the type of hydrogenation catalyst. The process appears that the catalytic activity can be further improved by adding a very small amount of Pt(0.01%wt), use of 5%wtNi-0.01%wtPt/Lin’an clay catalyst, the 100% conversion for MA and 100% selectivity for SA were obtained for MA hydrogenation at normal pressure. At low temperatures, reaction temperature on the catalytic activity and selectivity of great influence, but when the reaction temperature exceeds 110℃, then the conversion of MA and the selectivity of SA have no change.

Related Dissertations

  1. Synthesis and Characterization of High-performance Polyacrylonitrile,O631.3
  2. Study on Using Sepiolite As Supported Catalysts in Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol,O643.32
  3. Study on the Variation of Soil Clay Minerals and Influence Factors in Karst Regions under Different Rocky Desertification, Southwest China,X171
  4. Influence of Various PH and the Treating Time on Mechanical Property and Surface Structure of Ni-ti Orthodontic Wire,R783.5
  5. Ni / TiO 2 -SiO 2 Preparation, Characterization and Hydrogenation of Maleic Anhydride,TQ225.2
  6. High hydrothermal stability of nickel-based catalyst and hydrogenation of butyne diol,TQ223.162
  7. Application and Preparation of Octenyl Succinic Anhydride Starch As the Wall Material of Microcapsule,TS236.9
  8. Exploratory Research on the Demetallization of Crude Oil by Strengthening Electro-desalting,TE624.1
  9. The Research of the Effect of ASA Neutral Sizing Agent on Bagasse Pulp,TS727.5
  10. Elements Re nickel base single crystal alloy temperature creep behavior of,TG146.15
  11. The Preparation of Chitosan Grafted with Maleic Anhydride and Itaconic Acid and the Research of the Inhibition Performance,TQ085.4
  12. Polyisobutylene Epoxidation,TQ316.3
  13. The continuous bulk Law PMMA resin polymerization process,TQ320.61
  14. The Hydrogenation of Phytosterols,O629.21
  15. Galvanic Corrosion and Electric Insulation between Different Materials of Seawater Pipelines,TB304
  16. Research on Multivariate Regression Analysis of Nickel Plating Parameter and Thickness of Electroplating Forecasting,TG174.44
  17. A Computational Analysis of Bending and Torsional Properties of Three Nickel-Titanium Endodontic Instruments with Different Cross-sections,R781.05
  18. Study on Properties and Preparations of Blending Thermoplastic Elastomer-EPDM/PP,TQ334.2
  19. Study on the Weldability and Its Database System of Ni-based Alloy with Plasma Arc Welding,TG456.2
  20. Preparation and Application of the Stearic Acid Clay,TQ424.2
  21. Laboratory Investigation on the Behavior of Cement Mixed Soft Clayey Soil of Shanghai,TU411

CLC: > Industrial Technology > Chemical Industry > Basic Organic Chemistry Industry > The production of aliphatic compounds ( acyclic compounds) > Aliphatic carboxylic acid and its derivatives > Carboxylic acid derivatives of the function > Carboxylic acid anhydride
© 2012 www.DissertationTopic.Net  Mobile