Dissertation > Excellent graduate degree dissertation topics show

Optical design and process of mobile phone LCD backlight module light guide plate in

Author: ShuWei
Tutor: ZengZuo; LingZhiHua
School: Fudan University
Course: Materials Engineering
Keywords: Light Guide Plate Back Light Unit Light tools Injection molding Taguchi method
CLC: TN929.53
Type: Master's thesis
Year: 2011
Downloads: 24
Quote: 0
Read: Download Dissertation

Abstract


With the development of science and technology, the liquid-crystal display has been the mainstream substituting for the Cathode Ray Tube. Because liquid-crystal display cannot certainly shine by itself, it needs the backlight module to realize its display function. In backlight module, light guide plate (LGP) is a key-component because of the function of guiding light. With the thickness of LGP decreasing and the quality request to make light achieve high brightness and the uniformity, the design and fabrication of LGP is very important. For the thickness decreased, the luminance and uniformity decreased. So studying on the process and design has very important practical significance.In this paper, firstly, the optical principle of LGP is given. Some knowledge about luminosity in the test of LGP has been described. Secondly, a model is set up to derive the rule of scattering netted dot arrangement by the optical theory. Light out function is calculated under ideal condition and some factors about affecting uniformity of LGP are analyzed. Thirdly, Light tools software is used to establish3D model of light guide plate, and the process of light transduction of light guide plate is simulated on this foundation. And a uniform optical result is gotten by optimizing of netted dot. At last, a forming experiment of injection molding is designed in this paper, and how the process affect products’ quality is researched.33℃of molding temperature,231℃of melt temperature,90cm/sec of filling speed,10second of packing time,7.5MPa of packing pressure、35seconds of cooling time are gotten as the optimum set of process parameters by experiment.

Related Dissertations

  1. Injection Process Analysis and Optimized Deign of MP4 Product Based on the Moldflow Software,TQ320.662
  2. Optimum Research on Runner System in Bi-color Injection Mold Based on Genetic Algorithm and Moldflow,TQ320.52
  3. Design and Implementation of Hydraulic Injection Molding Machine Servo-pump Controller Based on DSP,TQ320.52
  4. Effect Research of Simulation Modeling of Virtual Injection Molding Machine System,TQ320.52
  5. Research and Implementation of CAE for Plastic Injection Molding Based on UG,TQ320.52
  6. Study on Numerical Simulation for Water-Assisted Injection Molding,TQ320.662
  7. Injection molding machine with a permanent magnet synchronous motor design and performance analysis,TM351
  8. Study on Injection Molding Process Multiobjective Optimization and Quality Estimation Based on RBF Neural Network,TQ320.662
  9. Multi-objective Optimization Design of the Injection Molding Process Parameters,TP391.7
  10. Deformation Analysis on Plastic Injection Mould Based on Boundary Element Method,TQ320.52
  11. Study on the Processing Parameters on Mechanical Properties of Microcellular Injection Molded Parts,TQ320.662
  12. The RPM Technology, True 3D CAE by Taking the Plastic Electric Equipment Shell Molding Research of Conceptual Production Based on Rapid Prototyping Manufacturing,TQ320.52
  13. Research on Process in Injection Molding of Microstructures in Optical Components,TQ320.662
  14. The Gate Location Optimization Based on the Analysis of the Geometrical Shape,TG244.4
  15. Study on the Packing Effects on the Shrinkage of Injection Molded Thick Wall Products,TQ320.662
  16. The Morphology and Structure of Isotatic Polypropylene Parts Molded by Water-assisted Injection Molding,TQ320.662
  17. Numerical Simulation of Residual Stress and Shrinkage after Ejection for Injection Molded Parts,TQ320.662
  18. Experimental Research the Effect of Crystallinity and Warpage about iPP Injection Mold Produce by Technological Parameter,TQ320.662
  19. Plastic Inclined Gear Tooth Profile Modification Research and Injection Molding Process Optimization,TH132.41
  20. Analysis and Optimization of Contrary Angle Clamping Unit for Injection Molding Machine,TQ320.52
  21. Plastic Structure and Gas-Assisted Injection Molding Process Optimization of Car Door Handle Based on Numerical Simulation,TQ320.662

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Wireless communications > Mobile Communications > Cellular mobile communications systems (mobile phones, mobile phone handsets )
© 2012 www.DissertationTopic.Net  Mobile