Dissertation > Excellent graduate degree dissertation topics show

Research and Analysis of Transmission Error on RV Reducer in Robot

Author: LuYan
Tutor: HeWeiDong
School: Dalian Jiaotong University
Course: Mechanical Design and Theory
Keywords: RV transmission Transmission error Equivalent model
CLC: TP242
Type: Master's thesis
Year: 2013
Downloads: 86
Quote: 0
Read: Download Dissertation

Abstract


RV transmission is a new type of transmission developed on the basis of pin-cycloid planetary gearing. Compared to other traditional planetary transmissions,it has many advantages, and has been newly employed in industial Robot joints, which especially require high transmission precision.. In order to improve the precision and stability of the transmission, it is necessary to research and analyze the transmission error.This thesis aims at finding out the serere factors that influence the transmission error and giving rational guidance for design, manufacturing.In accordance with the structure of RV reducer and the principle of the transmission, the thesis first theoretically works out the bases for dynamic analysis, including:the expression of the transmission ratio of the reducer by using the structure kinomatic inversion method, determination of the source and factors which impact on the transmission error based on the error-causing theory and dynamic equivalent model of the reducer for analysis of transmission error with the condition of constant speed and ignoring the meshing friction of the gearing, at the same time, considering the manufacture assembly errors and elastic deformation of the components of the reducer as well. In the process of above equivalent transformation from the reducer to the model mentioned above, dynamic sub-structure method and lumped mass method are employed.The meshing stiffnes of the two-stage gearing in the equivalent model are calculated by Ishikawa, a revised through the use of Herz formula respectively. For the turning arm bearing and planet carrier support bearing the equivalent stiffness is caculated by using the bearing stiffness method. This paper takes RV-40E as the research object, the force, moment of inertia of the component and size are calculated through computer programming iteration.Solve the dynamic equation via computer simulating calculation with software MATLAB for RV-40E reducer under the condition of stable operating. Then the transmission error curve is obtained. In the calculation,31items of manufacture and assembly errors are respectively considered, which include the eccentric errors of sun gear, planet gear, crank shaft, holes on cycloid gear and on planetary frame, tooth profile error and accumulated tooth-pitch errors of cycloid gear and needle wheel, and so on. Furthermore, by comparing the transmission error curves of the reducer caused by each single above mentioned with each other, some severe factors which heavily impact on the transmission error are found. Consequently, further research has been taken by setting specific values of manufacture error in its tolerance zone to determine the corresponding transmission error curve respectively.

Related Dissertations

  1. Research of Error Concealment Techniques in Wireless Video Transmission Based on H.264,TN919.81
  2. Astudy on Base Station Omni-directionalantennas for MIMO Communications,TN828.6
  3. Optimal Power Flow Control Based on Electronic Power Transformer,TM76
  4. The gear dynamic transmission error precision test of system design and analysis,TH132.41
  5. Study on the Transmission Line Protection of the UHV Grid,TM773
  6. Electromagnetic Transient Simulation Method of Power System Based on Diakoptics,TM743
  7. Research and Appication of IP OVER SDH Technology in Metropolitan Area Network,TN914.332
  8. Research on Large-Scale Wind Farm Modeling and Voltage Stability,TM614
  9. Research on Equivalent Models of the Mechanical Function for Sandwich Structure with Rectangular Filled Porous Materials,TB383.4
  10. Modal Research on Dynamical Characteristic of Big Helical Gears Transmission,TH132.41
  11. Numerical Modeling of Seismic Wave in TTI Media,P631.4
  12. MMIC study of ferromagnetic thin-film inductors,TM55
  13. Study on Model Establishment and Control Strategy of VSCF Wind Power Generation System,TM315
  14. Fabrication, Theoretical Model and Analysis of Ionic Polymer-metal Composites,TB333
  15. Study on the Conductive Characteristics of Dielectric Barrier Discharge Plasma,TN86
  16. Research of Heat Transfer Characteristic of Air Cold Plate in Electronic Cabinet,TK124
  17. Research on Optimization of Electromechanical Transient Model and Interfaces Model Based on Real-Time Digital Simulation(RTDS),TM743
  18. Automobile main reducer the assembly transmission error measurement,U463.218.2
  19. The Design and Simulated Experiment for Detecting System of Transmission Error Based on FPGA,TP274
  20. Application Research of Fault Diagnosis Technique in Locomotive Condition Monitoring Based on Instantaneous Speed,U269.322
  21. Study on Gear Transmission Based on Error Modeling and Tolerance Accessing,TH132.41

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot
© 2012 www.DissertationTopic.Net  Mobile