Dissertation > Excellent graduate degree dissertation topics show

Research on Rock Burst Forecasting about Charge Induction Signal of Coal-rock Mass

Author: TangZhi
Tutor: PanYiShan；YanHaiPeng
School: Liaoning Technical University
Course: Solid Mechanics
Keywords: coal rock deformation rock burst charge induction signal temperature friction
CLC: O347.2
Type: Master's thesis
Year: 2011
Downloads: 75
Quote: 0
Read: Download Dissertation

Abstract


Rock burst is one of the worst natural disasters in worldwide coal mine,forecast for it and take timely measures to prevent the regional and local risk is very important, charge induction signal change features predicts percussive ground pressure is a feasible method。The rules and influence factors of coal rock deformation process charge induction signal in indoor experiment and field test is studied in this paper。Experiment system of charge induction coal and rock deformation signal under Uniaxial Compression is established,and signal characteristics and the changing laws in different types of coal and rock in the same loading rate under charge induction is studied; signal characteristics and the changing laws in the same type coal and rock under different loading rate under charge induction is studied; the relationship of coal rock mass deformation process charge induction signal and compressive strength relationship is studied. It is shown that charge induction signal increased with enlarged loading rate in different loading rate and different types of coal and rock;amplitude of charge induction signal increased with enlarged ultimate stress in same loading rate and different types of coal and rock.Experiment system of charge induction signal influenced with temperature is established,and signal characteristics and the changing laws of coal and rock with change of temperature is studied. The results indicate that charge induction signal increased with enhanced temperature, and environmental temperature has almost no influence to charge induction signal predicts rock burst.Experiment system of charge induction signal influenced with coal rock friction is established, and signal characteristics and the changing laws in the process of coal and rock by friction is studied, and obtained charge induction signal and coal rock properties have larger relationship by friction in the process of coal and rock, the coal rock harder, the charge induction signal value in friction is higher.The experimental results demonstrate that the main mechanism of coal and rock charge generation is the coal rock particle, mineral particles and cementation things happen between sliding, fault dislocation, for the friction and produce charge in the process of coal rock being loaded.The information of coal rock charge induction signal reflects the main factors influenced rock burst comprehensively, The amplitude of charge induction signal reflects the level of coal and rock loaded and deformed. Using coal rock charge induction signal to assess and predict rock burst risk is feasible and efficiently, the monitoring results can determine the regional location rock bursts occurred in, it provided scientific basis for us to take corresponding and effective prevention measures.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Preparation and Electrocaloric Effect of BaxSr1-xTiO3 Ferroelectric Thin Films,TB383.2
  3. Measurement of the Surface Impedance of the High Temperature Superconducting Thin Films with Coplanar Transmission Line,O484.5
  4. Global Stability of Telescopic Boom with Impact of Lap between Booms and Friction,TH211.6
  5. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  6. Research on Temperature Measurement Technique Based on CCD Image Sensor,TH811
  7. Development of Explosion Flame Temperature Measurement System Based on Multi-Spectral Thermometry,TH811
  8. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  9. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  10. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  11. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  12. Design and Implementation of Space Rendezvous and Docking Linear Movement Simulator Control System,TP273
  13. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  14. Research on Servo Control System of Gyro-Stabilized Platform,TJ765
  15. Effects of Temperature and Raising Seedling Pattern on the Growth and Development of Strawberry,S668.4
  16. Effects of Temperature, Salinity, Dissolved Oxygen, Ammonia-N and Nitrite-Non the Molting of Scylla Paramamosain,S917.4
  17. Preparation and Properties of Chitosan-based Thermosensitive Composite Hydrogel,R943
  18. The Influence of Long-term Regular Exercise to the Distribution and Change Regulation on Human Skin Temperature,G804.2
  19. Study on Technics & Performance of Nano Electroless Composite Plating on 20~# Steel,TQ153
  20. LSGM electrolyte thin films and electrochemical properties of,TM911.4
  21. The Studying of Temperature Distribution and Control Technique during Polymer Sheet Heat Process,TQ320.6

CLC: > Mathematical sciences and chemical > Mechanics > Solid Mechanics > Deformation solid dynamics > Dynamic Stability
© 2012 www.DissertationTopic.Net  Mobile