Dissertation > Excellent graduate degree dissertation topics show

Design and Research on the Robot RY1 of Carring the Explosive Device

Author: LiYanPing
Tutor: WuWeiMin
School: Xinjiang University
Course: Control Theory and Control Engineering
Keywords: Mobile Robot SONOWAND Information fuse PWM
CLC: TP242
Type: Master's thesis
Year: 2010
Downloads: 44
Quote: 1
Read: Download Dissertation

Abstract


Along with the rapid development of Chinese economy, the demand for the explosive device is gradually increasing. The production capacity for the explosive device are expanding as well. Therefore, to improve the security of explosive industry production is very important. Explosive device refers to dangerous goods such as explosives, ,detonators and detonating fuse. But it is produced half-automatically and manually in most private enterprise. And raw materials and finished goods are transported by human. As explosive device are flammable, it threatens to the personal security of the workers.It will solve the problem of transportation for the dangerous explosive device in production by using robot to carry the explosive device. The transportation is changed from carrying by human to carrying by robot. It realize automatic. Because robot can be located precisely, It can be kept for a certain safe distance. This can help to reduce the safety incident to the limit. Thanks to robot, it reduces enterprise cost, improve production efficiency and increase the enterprise profit.This article makes a series of research about mechanical structure, system structure, trajectory and obstacle avoidance technique and PC software design of robot RY1, which is used to carry explosive device. The structure is designed using four-wheel drive and independent steering wheel according to the design requirements about the robot. It makes research about each drive circuit and commutation circuit etc. Kalman filtering method is adopted to build and positioning for the robot RY1. It is used Bayesian method to analyze the data which is collected by ultrasonic sensors. The analysis can help to work out the solution for the detection of obstacles based on the robot environment. The article puts forward a theory which is called "S curve". The theory can effectively control the turning of robot. It makes robots running smoothly. A series of software are designed such as PWM software design, software development about how to make robot running as the trace and software design of obstacle avoidance are worked out as well.

Related Dissertations

  1. Model of Cylinder Controlled by On-Off Valve and System of PWM Control,TH138
  2. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  3. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  4. Drip Irrigation Control System Based on Pulse Width Modulation (PWM),S152.7
  5. Intelligent Cleaning Robot Control System Design Based on the ARM,TP242
  6. Mobile Robot Navigation Control Based on the Weights of Multi-sensor Information,TP242
  7. Research on Mobile Robot Path Planning and Simulation Realization,TP242
  8. ALU-8521LS generator regulator fault detection system design and implementation,TM423
  9. Thedesign of a Low-voltage Brushless DC Vibration Motor Driver,TM33
  10. Research on the Application of Fundamental Magnetic Flux Compensation-type Series Hybrid Harmonic Suppression Device,TN713.8
  11. Loss Characteristics of Infrared Hollow-core Bragg Fiber,TN253
  12. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  13. The Study and Design of Multilevel High Voltage Frequency Inverter,TM921.51
  14. Water hydraulic drive underwater robot robust control of PWM,TP241
  15. Solar LED street light controller Research and Design,TM923.34
  16. Indoor air purifiers developed high voltage power supply,TN86
  17. Ozone generator power inverter Research and Design,TM464
  18. Research and Design of High-frequency Inverter Control and Driving Module,TP273
  19. Research and design of high-voltage inverter,TM921.51
  20. With feedforward compensation capacitor the third category of the feedback network 's role in switching power supply,TM46
  21. Stand-alone PV system,TM912

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot
© 2012 www.DissertationTopic.Net  Mobile