Dissertation > Excellent graduate degree dissertation topics show

Preparation and Property Study of Polyaniline/Polyester Composite Conductive Fabric

Author: XuShouFei
Tutor: LiQing
School: Beijing Institute of Clothing Technology
Course: Textile Chemistry and Dyeing and Finishing Engineering
Keywords: Plasma Polyaniline In-situ Polymerization Conductive fabric
CLC: TS195.6
Type: Master's thesis
Year: 2012
Downloads: 17
Quote: 0
Read: Download Dissertation

Abstract


Polyaniline shows attractive prospects in many respects, easy to prepare, cheap raw material,high conductivity,environmental stability,etc. But the insolubility and non-melting of this material have limited its further processing。However, deposition of polyaniline on conventional fiber will provide a composite fabric which possesses the good conductivity of polyaniline and the flexible property of fiber fabric.At present polymerization in situ is the main method of preparing polyaniline composite conductive fabric. But the material made in this way has shown weak fastness of polyaniline on the matrix fabric; lower deposition of polyaniline also leads to lower conductivity.In this study, the microscopic surface of the matrix fabric was significantly modified by treatment of polyester fabric with alkali at low concentration and using plasma of low temperature. The composite conductive fabric was then prepared by in situ polymerization to form polyaniline layers on the surface of polyester fabric. The main influencing factors of pretreatment which have been studied include concentration of alkali,alkali deweighting time,alkali deweighting temperature,and the pressure, power, processing time of low temperature plasma. The influence of these factors on the surface resistivity of composite conductive fabric has been established. Meanwhile, for the process of in situ polymerization, the concentration of monomer,concentration of ammonium persulfate, oxidation reaction time, and the type and concentration of doping acid have also been investigated. Alkali deweighting with NaOH (20 g/L) at 90℃for 90 minutes and low temperature plasma (300 W, 30 Pa, 4 minutes) were the optimum conditions for pretreatment. In situ polymerization was best carried out with ammonium persulfate (0.025g/ml) as oxidant; hydrochloric acid as the doping acid (0.6mol/L). The preprocessed fabric was first immersed in a solution of aniline monomer (0.3mol/L) for 1.5 hours; oxidative polymerization for 90 minutes produced a composite conductive fabric with the lowest surface resistivity of 0.07 KΩ.The structures and properties of the polyaniline polyester composite conductive fabric were researched. Infrared spectral analysis shows the deposition of polyaniline on the fiber surface. In the SEM (scanning electron microscopy) images, a large number of concave grooves and bump things are observed after pretreatment of fabric fiber, which will benefit the deposition of polyaniline. On the surface of polyaniline composite conductive fabric fiber, there are lots of homogeneous reticulations,namely polyaniline grains,which can form the conductive pathways on the polyester surface.X-ray diffraction and DSC analysis show that polyaniline enters the theamorphous area of polyester fiber and the crystallization perfect degree of parts of polyester molecules is thus reduced. Tg analysis shows that the thermal stability of the polyester fabric has been improved because of the presence of polyaniline.After pretreatment of fabric fiber surface by the alkali deweighting-low temperature plasma technology,the K/S value of composite conductive fabrics gets bigger,which demonstrates a high adsorption of polyaniline on the conductive fabrics. The mechanical properties of composite fabric were insusceptible, based on the analysis of mechanics performance.Our research clearly shows that the polyaniline composite conductive fabric prepared in this way has certainly improved shielding effectiveness, the surface resistivity can be 0.89 K? even after 5 times of ultrasonic washing. This novel fabric will find wide applications in industry.

Related Dissertations

  1. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  2. Experimental Investigation and Mechanism Exploration on the Degradation of N-heterocyclic Compounds with Dielectric Barrier Discharge,X703
  3. Optical Spectrum Diagnose of Stationary Plasma Thruster Channel Wall Sputtering Erosion,V433.9
  4. Study on LC Resonance Charge and POS Based Pulsed Power Supply,TN782
  5. Research on the Methods of Nasopharyngeal and Gastric Cancer Detection Based on Surface-enhanced Raman Spectroscopy,R739.63
  6. The Preparation of Polyaniline-Metal Complex and the Study on Its Catalytical Property,O634
  7. Preparation and Anticorrosion Properties of Doped Polyaniline/Epoxy Coating,TQ637
  8. The Application of Eggshell Membrane for Solid-phase Extraction and the Determination of Trace Metal Elements in Environment Water,X832
  9. Study on Separation、 Preconcentration and Analysis of Trace Elements with Carbon Nanometer Materials,TB383.1
  10. Research on PSA/Cotton Blend Fabric of Coatinging of Water Resistance and Moisture Permeability,TS195.6
  11. Studies on the Preparation of 20% Chlorpyrifos CS and Its Analytic Methods,S482.3
  12. Study on Ca2+/H+ Antiporter Avtivity and Its Gene Expression of Apple,S661.1
  13. Study on the Anesthestic Quality, Blood Concentration and Clinical Application of Shumianning Administered Intravenously by Continuous Rate Infusion Using Microinjection Pump in Dogs,R965
  14. GC-MS Analysis of Endogenous Metabolites in Plasma of Police Dog after Aflatoxicosis,S858.292
  15. Pharmacokinetics of Progesterone Cream in Beagle Dogs Determined with LC-MS/MS,R96
  16. Isolation and Cultivation of Rabbit Adipose-derived Stem Cells and the Influence of Platelet-rich Plasma on the Cell Proliferation,R329
  17. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  18. Study on the Determination and Migration of Hazardous Chemicals in Polyethylene Plastic Food Packaging Materials,TS206.4
  19. Applied Clinical Research toward Improving Fat Cell Survival Rate in Autologous Fat Transplantation Breast Augmentation,R622
  20. Variation of Immune System and Clinical Experiment Indicators in Patients with Gastric Cance and Its Association with 15 STR Loci,R735.2

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > Dyeing and finishing industry > Finishing > The finishing of a variety of fiber and its products
© 2012 www.DissertationTopic.Net  Mobile