Dissertation > Excellent graduate degree dissertation topics show

Research and Realization of the Underground Mine Personnel Locating and Tracking System

Author: ZhaoQi
Tutor: GuoFengYi
School: Liaoning Technical University
Course: Motor and electrical
Keywords: coal mine tracking and orientation ZigBee technology CAN bus location station
CLC: TP212.9
Type: Master's thesis
Year: 2010
Downloads: 53
Quote: 0
Read: Download Dissertation

Abstract


With the increasing supervision to the safety production of coal mine, however, for a variety of reasons, mine accidents also are happened from time to time. After the accidents, it is the key for relief work to report the place and situations of underground staff accurately.This paper formed ZigBee wireless locating network with CC2431 which had positioning engine. Meanwhile, it studied the CAN bus technology, this paper proposed a feasibility planning of extending CAN bus actual transmission distance. Based on this, it was designed a proposal of personnel tracking system underground. The system is divided into underground personnel tracking subsystem and monitoring management subsystem. This paper introduced in detail the hardware and software implementation scheme of underground personnel tracking subsystem, including location station, reference node, mobile positioning node, bus repeaters and communication processor design. In addition, it adopted the Microsoft Visual Basic and SQL Server 2000 software monitoring management system.This system can be used not only daily management and attendance, but also it can make sure the personnel position accurately in the accident. It can meet the actual demands of a coal mine enterprise and has high practical value.

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  3. Study on the Locomotive Dynamic Supervision System,U284.48
  4. The Inductive Load Based Vehicle Body Network Control System,U463.6
  5. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  6. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  7. Research on High-Performance Computer I/O Bus,TP336
  8. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  9. Development of the Digitizer Based on PCI-E Bus,TP274.2
  10. Design of LXI 1553B Bus Communication Module,TP273
  11. Design of the Main Controller in Automotive Body Network Control System,TP273
  12. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  13. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  14. Research and Design of Web Reports Based on Service-Oriented Architecture,TP393.09
  15. Engineering Design on the Treatment and Reuse of Coal Mine Drainage,X752
  16. Reform of the civil service positions Consumption,D630
  17. Legal Problems of Coal Mine Safety Supervision,D922.62;X922.2
  18. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  19. Hardware Implementation of Block Ciphers Algorithm Based on Petri Net,TN918.2
  20. Application of AWG in Decoy Protection Equipment,TN97
  21. The Study on Site Selection Methods about Bus Transfer Hub at Cross-Harbor Tunnel in Qingdao,U491.17

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Sensor applications
© 2012 www.DissertationTopic.Net  Mobile