Dissertation > Excellent graduate degree dissertation topics show

Preparation of Emulsion-based Additives and Their Effects on the Precipitation Ratio of Seed Precipitation from the Sodium Aluminate Liquor

Author: SunYanJie
Tutor: ChenFeng
School: Northeastern University
Course: Organic Chemistry
Keywords: silicone surfactant emulsion-based additives sodium aluminate liquor precipitation ratio
CLC: TF821
Type: Master's thesis
Year: 2009
Downloads: 16
Quote: 0
Read: Download Dissertation

Abstract


Using additives to improve the precipitation ratio of sodium aluminate liquor is one of the most effective way to increase profits for alumina production enterprise.This article explores the synthesis of a silicon-carbon anionic surfactant, and uses silicone surfactant and other auxiliaries drugs to make a new type of emulsion-based additives, and compares the additives’ effection on improving the precipitation ratio of sodium aluminate liquor with two other new types of emulsion-based additives.First of all, Using p-Bromotoluene as raw materials to synthesize an anion surfactant which contains Si-C bond in the chain backbone. During this process, the influence of solvent dose, time and temperature on the yield were reviewed, then the compound was test by IR and HNMR.Secondly, we confect nine emulsion-based additives of three types DL-A, DL-B and DL-C using anion surfactant and other materials.Thirdly, using the sodium aluminate liquor of Shandong Xinfa Huayu alumina production enterprise as material, we pick out the excellent additives, in the whole experiment, the additive DL-A1 and additive DL-B2 both show good performance.Fourthy, Finding out the best conditions on add time and add quantity for additive DL-A1 and additive DL-B2, and comparing their performance once more. The results show that the best add time is 30 hours after the start time, the best add quantity is 25 mg·L-1, and the additive DL-A1 is better than additive DL-B2. Under the best coditions, additive DL-A1 can increase the precipitation ratio above 1.5% steadily, and it also take good effect to the quality of aluminum hydroxide and alumina..Fifth, Changing the experimental conditions to investigate the relations between production conditions and the effect of additive DL-A1. Finally we do industry experiment with the additive DL-A1 in the first product line in Shandong Xinfa Huayu alumina production enterprise. The results show that the additive DL-A1 can increase the precipitation ratio above 2%, removing the uncertainty of industrial production, it could at least improve 1.5%. At the same time, the additive DL-A1 could improve the granularity of aluminum hydroxide and alumina, and it also has some effect on elimination of the bubble.

Related Dissertations

  1. Preparation of Oil-soluble Defoamers and Their Research and Application on the Seed Precipitation from the Sodium Aluminate Liquor,TQ423.95
  2. Preparation of Oil-soluble Additives and Their Effects on the Precipitation Ratio of Seed Precipitation from the Sodium Aluminate Liquor,TF821
  3. Polyether - Silicone surfactant and defoamer preparation,TQ423.9
  4. Preparation and Properties of Carbohydrate Modified Polysiloxanes,TQ423
  5. New method with a the Guizhou high sulfur bauxite production alumina desulfurization studies,TF821
  6. Of diols additives Sodium Aluminate Solution Seeds,O611.3
  7. Study on Aggregates in Aqueous Solution of CH/CF and CH/Silicone Surfactant Mixtures,O647.2
  8. Research and Implementation on Sintering State Prediction Method Based on SVM and PSO,TF821
  9. Temperature alkaline secondary smelting of aluminum ash,TF821
  10. Studies on Effect of Cooling System on Leaching and Self-disintegrating Properties of Calcium Aluminate Slag,TF821
  11. Liquidus Temperature and Al2O3 Solubility of the System Na3AlF6-K3AlF6-AlF3 and Corrosion Test of Inert Anodes in Low Temperature Aluminum Electrolytes,TF821
  12. Aluminum electrolytic composition analysis of complex molecular ratio Correction,TF821
  13. Energy Utilization Analysis and Research of Energy Saving for Alumina Evaporation Progress,TF821
  14. Simulation and Optimization on the Iron-Carbon Contact Voltage Drop of Anode in Aluminum Reduction Cell,TF821
  15. Research on the Utilization of Nontraditional Bauxite Resources Including Sulfur-containing Bauxite and Fly Ash,TF821
  16. Precipitation of Al and Si from Depth Carbonation Process of Sodium Aluminate Solution,TF821
  17. A Study on Fluidization Separating-washing of Leached Slurry and Its Effect on Secondary Reactions,TF821
  18. Optimized Control for Aluminum Reduction Cell Based on Knowledge Driven,TF821
  19. Alumina vacuum carbothermal reduction experimental study of the mechanism and process - aluminum chloride process,TF821
  20. Alumina vacuum carbothermal reduction experimental study,TF821
  21. Extracting Aluminum Hydroxide from Fly Ash,TF821
  22. 400KA Aluminum Reduction Cell Energy Optimization Control System and Realization,TF821

CLC: > Industrial Technology > Metallurgical Industry > Nonferrous metal smelting > Light metal smelting > Aluminum
© 2012 www.DissertationTopic.Net  Mobile