Dissertation > Excellent graduate degree dissertation topics show

Technology Development and Enhanced Heat Transfer Effect Evaluation of Surface Modification in Gravity Heat Pipe

Author: LiBinBin
Tutor: XuHong；ZhangLi
School: East China University of Science and Technology
Course: Chemical Process Equipment
Keywords: Gravity heat pipe Surface modification Heat transfer performance Filling ratio Inclination angle
CLC: TK172.4
Type: Master's thesis
Year: 2012
Downloads: 93
Quote: 0
Read: Download Dissertation

Abstract


Along with energy shortage extended day by day and the development trend of energy efficient utilization, the study on enhanced heat transfer of heat pipe has attracted increasingly significant attention. So this paper relied on ordinary gravity heat pipe, mainly study on the high efficiency of surface modified heat pipe.A surface modified efficient heat pipe was self developed. The inner surface in the evaporator section was coated with sintered porous layer, and the inner surface in condenser section was coated with Ni-P electroless plating. The surface modified efficient heat pipe exhibited better performance in enhancing heat transfer. Experiment results demonstrated that the internal overall heat transfer coefficient of surface modified efficient heat pipe increased 44%-58% compared with that of ordinary gravity heat pipe. In addition, the effect of powder size on the heat transfer performance of the heat pipe was studied and compared:when the porous layer thickness was the same, the heat pipe exhibited better performance in enhancing boiling heat transfer, which of sintered porous layer of the inner surface in the evaporator section was coated by appropriate meal powder. The effect of filling ratio and inclination angle on the heat transfer performance of surface modified efficient heat pipe was studied experimentally. The results showed that the comprehensive performance was optimal, when the filling ratio was 20% and the inclination angle was at 30°～45°.

Related Dissertations

  1. Research on Surface Modification of Power Station Valve Steel,TG174.44
  2. Study about the Characteristic of Poplar Surface by the Treatment of Low Temperature Plasma,TS652
  3. Surface Bio-Functionalization of Biomaterial and Ceramic Scaffolds with Controllable Microstructure,R318.08
  4. Study on Bending Fatigue of High Current Pulsed Electron Beam Hardened Gears,TH132.41
  5. Effect of the Strip Inclination Angle on Friction and Wear Behavior of Carbon Strip/Contact Wire in a Pantograph/Catenary System,U264.34
  6. Spiral fluted tube heat transfer and flow resistance properties and dirt Numerical Simulation,TK124
  7. Influence of Behavior of Metallic Heat Transfer Surface on the Formation Characteristics of Crystalline Fouling,TK172
  8. Research on the Performance of Heat Transfer of New Solar Wall,TK513
  9. Surface Modification of Titanium Dioxide and Its Photocatalytic Properties,O643.36
  10. Hydrotalcite compounds , modified and applied in PVC,TQ325.3
  11. Preparation of ZnO Hollow Structures and Their Photocatalytic Activity,TB383.1
  12. Studies on Preparation and Properties of Micro-arc Oxidation Coating on Biomedical AZ31B Magnesium Alloy,TG174.4
  13. Study of Reflection-type Fiber-optic Biosensor Based on Multimode Interference,TP212.3
  14. Preparation, Characterization and Fluidity Research of Water-soluble L-Cysteine Carbon Microspheres Derivatives,R318.08
  15. Surface Modification of Polycarbonateurethane Film to Improve Its Hemocompatibility by Covalent Linkage of Heparin,R318.08
  16. Surface modification of hydroxyapatite whisker filler reinforced composite resin dental research,R318.08
  17. Research on the Thermal-control Method for Aircraft Wings and Thermal Performance Analysis of the Heat Pipe,TK172.4
  18. Hydroxyapatite / nano- cellulose Preparation and characterization of composite materials,R318.08
  19. Modified Kaolin Was Applicided in SBR,TQ333.1
  20. Synthesis and Characterization of Polyetheretherketone/hydroxyaptite Composites Via Solution Blending Method,TB332
  21. Surface Modification of Nanosilica and Its Application in Preservation of Cultural Relics,TB383.1

CLC: > Industrial Technology > Energy and Power Engineering > Thermal engineering, heat > Industrial thermal equipment > Heat Transfer Equipment > Heat pipe
© 2012 www.DissertationTopic.Net  Mobile