Dissertation > Excellent graduate degree dissertation topics show

Preparation of Electroless Plating on Heat Transfer Surface with Low Surface Free Energy and Study on Their Anti-fouling Property

Author: WangYueFeng
Tutor: XiaXiangMing；HouFeng
School: East China University of Science and Technology
Course: Chemical Process Equipment
Keywords: electroless plating surface free energy pool boiling fouling resistance anti-fouling
CLC: TK172
Type: Master's thesis
Year: 2012
Downloads: 11
Quote: 0
Read: Download Dissertation

Abstract


Fouling is a widespread problem in the design and operation of heat exchanger. Heat transfer surface with lower surface free energy may greatly inhibit fouling.Electroless Ni-P and Ni-W-P coatings were prepared on copper substrates in this paper. X-ray diffraction results showed both the coatings are amorphous. The values of surface free energy for copper sample, Ni-P coating sample, Ni-W-P coating sample were 52.4mN/m, 35.5mN/m,23.4 mN/m respectively. The surface free energy for electroless plating surface dropped obviously.Fouling adhesion test and pool boiling anti-fouling experiments were carried out in calcium sulphate solution. Compared with the copper surface, the scale adhesion speed on the electroless coatings with lower surface free energy were reduced by 46 percent for Ni-P coating and 54 percent for Ni-W-P coating respectively. Asymptotic value of fouling resistance for Ni-P coating surface and Ni-W-P coating surface were reduced sharply. The bubble behavior on heat transfer surface was captured by a high speed camera. Depending on the heat transfer mechanism, two different types of deposits were observed on the heat transfer surface. A needle-like structure was the characteristic of scale formed on a plain copper surface, while a granular structure corresponded to the scale formed on the electroless plating surface.

Related Dissertations

  1. Of dual responsive material for the surface modification of the aromatic polyamide film,TB383.2
  2. The Preparation of Metallic Fabrics with PD-Free Activation and Research of Its Properties,TS106
  3. Nano- refrigerant heat transfer characteristics of pool boiling,TB64
  4. The Effect of Pd Doping and Chemical Pd-plating on the Electric-Magneto Transport Properties in LCSMO System,O482.5
  5. Study on the Technics Structure and Performance of Compound Processing of Gas Multi-Elements Peneterting and Electroless Plating,TG156.8
  6. The Preparation of Cenosphere Composite Absorbent,TB34
  7. Study on Fabrication and Properties Used for Heat Transfer of Porous Fiber Metals,TQ343.2
  8. Electroless Deposition of Ni-W-P Coating on AZ91D Magnesium Alloy,TQ153.1
  9. Studies on Anti-Corrosion Behaviors of Electroless Deposited Ni-P and Ni-P-PTFE Coatings in Seawater,TQ153.1
  10. The Preparation and Characterization of Metal/Conducting Polymer on Surface of Fabric,TS195.5
  11. Preparation and Performance Study of Water-borne Antifouling Coatings Containing Algae Extracts,TQ637
  12. Study on Design of Antifouling Coatings and Their Antifouling Properties,TQ630.6
  13. Preparation and Study of Polyacrylamide-based Antifouling Materials,TQ637
  14. Study on Tin-Plating of PCB Process and Electrochemical Behavior,TQ153.13
  15. Study on Application of Molecule Self-Assembly in Preparation of Surface Microtopographies Antifouling Materials,U668
  16. Extraction, Separation and Idification of Antifouling Active Substances in Ulva Pertusa,R284
  17. Study on the Technology of Poplar Plywood and LVL with PF Resin or Soybean Adhesive,TS653
  18. Mussel-Inspired Biomimetic Surface Functionalization and Metallization of XNBR and Graphite,TQ333.7
  19. Testing and Analysis of Surface Free Energy of Asphalt Based on Image Processing,U414
  20. Research on the On-line Anti-fouling Technology of Evaporator,TQ051.62

CLC: > Industrial Technology > Energy and Power Engineering > Thermal engineering, heat > Industrial thermal equipment > Heat Transfer Equipment
© 2012 www.DissertationTopic.Net  Mobile