Dissertation > Excellent graduate degree dissertation topics show

Development of Hot-rolled and Ribbed Round Steel Bars 25CrMoA for Ultra-high Strength Oil Sucker

Author: LiuFaYou
Tutor: WangZuo；XiaoXianChao
School: Liaoning University of Science and Technology
Course: Metallurgical Engineering
Keywords: super high strength steel bars for oil sucker 25CrMoA transverse rib
CLC: TG335.11
Type: Master's thesis
Year: 2012
Downloads: 14
Quote: 0
Read: Download Dissertation

Abstract


The oil delivery with rod pump is global common mode at present. Oil sucker is one of the most important equipment for rod pump and the super high strenghth oil sucker is most populat oil sucker.In this paper, Hot-rolled and ribbed round steel bars 25CrMoA for super-high strength oil sucker is developed on the basis of compositon design, shape improvement and production process, combined with the user’s demand and the pratical production process. Plenty of pratical tests showed that the content of Carbon should be controlled in less than 0.04%; transvers libs are set on two opposite sides. The distance of lib is 900mm～1162mm on the same side and that is 400mm～600mm on the adjacent opposite side. The longitudinal directionent of lib is consistent with that of rolled pieces. The conjoint region of the lib salient and rod body is R0.5～R1.5 arc transition. The design of crescent moon type for transverse rib slot,can stop the longitudinal crack on the surface of transverse rib; the excessive wear of transverse rib can be decreased through the controlling of temperature of final rolling, nipping of guarding and rolling path; the straightening can be reached≤3 mm/m after cooling; the round bars are cut by arc-like shearing machine that will bring good end; at （880±15）℃heat for 30 minutes after the water-cooled, 530℃ 545℃air-cooled heat 40 minutes later, the steel σb from 963 MPa 975 MPa,σs from 900 MPa 930 MPa,δ200 from 9% to 11% ensure the mechanical properties of steel to meet the standards. After the analysis of extensibility after cutting, we think that fixed scale distance does not involve the affection of diameter to the testing result, so, it is a trial for heat treatment within 15℃of tempering range. The pratical application showed that such oil sucker has the advantages of eccentric wear proof and paraffin cutting that can decrease the decrease load of oil pump the breaking accident of pump rod.

Related Dissertations

  1. Experimental Study on Seismic Performance of Steel Reinforced Super-high-strength Concrete Column Joints,TU398.9
  2. Alloying elements and heat treatment on the impact of the high Zn ultra-high strength aluminum alloy microstructure and mechanical properties of,TG156
  3. Experimental Study on Shearing Resistance of Srshc Short Columns,TU398.9
  4. Containing Sc ultra high strength Al-Zn-Cu-Mg-Zr alloy thermal simulation heat treatment,TG166.3
  5. Research on the Creep Life of Super-high-strength Aluminium Alloy,TG146.21
  6. Experimental Study on Seismic Performance of Reinforced Super-high-strength Concrete Composite Columns,TU398.9
  7. Choice and Preparation for Kilometer Compressive Material (KCM) and Study on Its Configuration and Mechanical Properties,TU528
  8. Hot strip finishing line simulation software development process,TG335.11
  9. Research of Multi-roller Continueues Cold Rolling System on the Basis of Digital Control Tech,TG335.11
  10. Research and Application of a Method for Hot Rolling Plan in BaoSteel,TG335.11
  11. Study on Microstructure and Texture during Hot Rolling and Normalizing of Twin-roll Cast Silicon Steel Strip,TG335.11
  12. Development of 500MPa Grade Hot Rolled Wire Rod of Fine Grains,TG335.11
  13. The Application of AFS Fuzzy Classification Method in Laminar Cooling Process on the Runout Table,TG335.11
  14. The Research on the Model of Austenitid Transformation and Temperature Coupling for Hot Rolled Strips during Cooling Process,TG335.11
  15. Finite Element-based Model and Simulation of the Runout Table Cooling Process,TG335.11
  16. Magnesium alloy and aluminum alloy hot-rolled composite basic research,TG335.11
  17. Computer Simulation of Hot Continuouw Rolling of Strip and Study of Vertical Set Model,TG335.11
  18. System Simulation of Finishing Mill Process of Hot Strip Continuous Rolling,TG335.11
  19. Research on Hot Rolling Technique for Manufacturing Fine-Grained Dual Phase Steel Containing Nb and Ti,TG335.11
  20. Simulation of Microstructure and Production Parameter during H-Beam Hot Rolling Process,TG335.11

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling process > Rolling method > Hot-rolled
© 2012 www.DissertationTopic.Net  Mobile