Dissertation > Excellent graduate degree dissertation topics show

Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner

Author: WeiHongDa
Tutor: LiZhengQi
School: Harbin Institute of Technology
Course: Thermal Power Engineering
Keywords: Swirl burner Slagging Aerodynamic field Recirculation zone Numerical simulation
CLC: TK223.23
Type: Master's thesis
Year: 2008
Downloads: 95
Quote: 0
Read: Download Dissertation


The circumferential bias swirl bunner(CBSB) imported from babcock UK by Harbin Boiler Company was applied in the opposed wall firing boiler and caused slagging nearby the burner. Cold model experiments and numerical simulation combined with analyse of the working principle of the CBSB was performed to explore the reasons of this problem and to search for feasible scheme.Results of the aerodynamic experiments indicate that the central recirculation zone asymmetrically distributes. When the rate of the central air equal to design value, the recirculation zone started in the spout of CBSB, between the elongation line of the primary air and the secondary air spout and the pulverized coal fired easily in the premixing segment. Therefore, the primary air and the secondary air mix in advance ,which prompt the primary air with pulverized coal to rotate with the swiveling central air and secondary air and reach the water-wall after the premixing segment. That’s the reason of slaging in the water-wall around the nozzle of burner. The most expansion angle is 90°in the experiment. It is indicated that the expansion angle of the outer secondary air had little difference in the five Structures, which is about 60°in the smoke tracing experiment. The slagging is not caused by flash. The central recirculation zone became smaller while the nozzle of inner secondary air was moved towards furnace. The least central recirculation zone can be got while the nozzle of inner secondary air was just behind the flaring of outer secondary air. The high temperature flue gas entrained by the central recirculation zone reduces with the decrease of area of the central recirculation zone which helps to reduce slagging.Results of numerical simulation of the aerodynamic field indicate that the reason of central recirculation zone unsymmetrical distribution is that the primary air is injected to the internal barrel in a tangential direction through the nozzle, and it had a certain distance deviation from the central line of the burner. Along the circumferential direction the tangential velocity distributed unsymmetrically causing the whole aerodynamic unsymmetrical distribution.According to the figures of the axial velocity, radial velocity, tangential velocity at the nozzle of the CBSB, the conculsion can be drawn that the reason of slagging was also the primary air with pulverized coal driven to rotate with the swiveling central air and secondary air and the pulverized coal continuously diffusing widely near the water-wall. Tangential velocity had little difference. In the Structure 1, the axial velocity was the most fast attenuation, the radial velocity was the highest, it is the easiest slagging. While the nozzle of inner secondary air was moved towards furnace, the absolute value of radial velocity reduces, which is benefital to lessen slagging, but the movement of nozzle of inner secondary air can not eradicate slagging. It was also found that the jet was not flash in the simulation.This paper studys the results of slagging through the expriments and numerical simulation of the aerodynamic field ,and puts forward solution of slagging, which has important guiding significance and application value in engineering practice.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Research of Effect of Secondary Air Injector on Aerodynamic Field in 1025t/h CFB Furnace,TK229.66
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13

CLC: > Industrial Technology > Energy and Power Engineering > Steam Power Engineering > Steam boiler > Boiler constructed > Combustion devices > Burner
© 2012 www.DissertationTopic.Net  Mobile