Dissertation > Excellent graduate degree dissertation topics show

Modeling and Intelligent Decoupling Control of Looper Multivariable System

Author: QiuHongDong
Tutor: WuQingHong
School: Liaoning University of Science and Technology
Course: Control Theory and Control Engineering
Keywords: decoupling control CMAC-PID looper system single neuron PID
CLC: TP273.5
Type: Master's thesis
Year: 2012
Downloads: 61
Quote: 0
Read: Download Dissertation

Abstract


Constant looper height and constant small tension control is a basic characteristic of modern hot rolling mill. But in the rolling process, there is always dynamic speed drop which is caused by bitting and other external disturbance, so it is difficult to always keep mass flow balanceable among stands. We need to have the support of looper to detect and absorption the loop height which is caused by speed change and keep constant small tension.In this paper, with the background of the 1700mm hot rolling of the Anshan Iron and Steel, We mostly researched the looper system. The main research contents and achievements are presented as follows:Firstly, we analyzed the features of nonlinearity, strong coupling, uncertainty and multi constrained of the looper system and built a dynamic mathematical model of hydraulic looper system at the vicinity of the working point. And got the system state equation, then worked out the transfer function and discrete. So the basis of multivariable decoupling control is formed.Secondly, The PID was introduced to decouple the system and improve control effect. The results of the simulation show the effectiveness of this method, but also show the weakness of bad anti-interference. Therefore the CMAC-PID was proposed. Simulation results show the effectiveness and remarkable of this method.Finally, Based on these problems such as high overshoot of the CMAC-PID, a modified CMAC-PID is introduced to decouple the looper system and improve control effect. The simulation results indicate that this method retained the advantages of CMAC-PID, such as fast convergence and suppression of the interference, and at the same time this method overcomes the shortcomings.

Related Dissertations

  1. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  2. Intelligent Decoupling Control of Electrode Regulator System for Electric Arc Furnace,TP273
  3. Research and Design of Dissolved Oxygen Control System in Wastewater Treatment,TP273.3
  4. Neural Network PI Pepetitive Controller for Active Power Filter,TN713.8
  5. Design of Smart Temperature Controller Based on SOC,TP216
  6. Decoupling Control and Unbalance Compensation of Rotor on Bearingless Permanent Magnet Slice Motors,TM351
  7. The Study of Decoupling Control in Variable-Air-Volume Conditioning System,TM925.12
  8. Study of Field-Weakening Control on Electric Vehicle’s AC Induction Motor,U469.72
  9. The Hydrodynamic Models and the Decoupling Control Research in the Speed&Course of USV,U664.82
  10. Research and Implementation of CRH1 EMU inertia simulation scale system,U266
  11. ZTS16 electro-hydraulic proportional valve CMAC-PID Composite Control Strategy,TH137.5
  12. Research and design of embedded temperature and humidity controller,TP273
  13. Study on Hardware-In-The-Loop Simulation of Heater Experiment System,TP391.9
  14. Network Control System Based on Single Neuron delay compensation PID control,TP273
  15. Research of Brushless DC Motor Speed-adjusting System Based on DSP,TM33
  16. The Research on Control System of Ball Mill Load Based on Grey Prediction in Thermal Plant,TM621.7
  17. Research on Control System for Hexapod Bionic Robot,TP242
  18. Research of Multi-Cylindeff Orce Control Strategies Based on High Speed on/off Valves,TP273
  19. Study on the United Simulation and Experimental of the Machine and Hydraulic System for 22MN Fast Forging Press,TG315.41
  20. The Research on Measurement and Control System of Universal Testing Machine Based on Neuron Control,TP273.2
  21. Based on the three-dimensional dynamic platform motion decoupling control system design and research,TP273

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile