Dissertation > Excellent graduate degree dissertation topics show

Research on Intelligent Aerial Bomb for Forest Fire Fighting

Author: DengBo
Tutor: LiuShaoGang
School: Harbin Engineering University
Course: Mechanical Design and Theory
Keywords: cluster bomb TRIZ theory parachute gasbag throwing finite element method
CLC: S762
Type: Master's thesis
Year: 2011
Downloads: 17
Quote: 0
Read: Download Dissertation


Forest fire is a kind of severe natural disasters. Crown fire is the most damaging forest fire in all types of forest fires, however, the current firefighting equipment cannot extinguish the fire directly and effectively. This subject derives from the project subsidized by the special fund of Harbin Engineering University "Research on intelligent aerial bomb for forest fire fighting" (PN:HEUCFZ1025) which is collaborate with CSSC Jiujiang Changan Fire Fighting Equipment CO. Ltd. The purpose of this paper is to design an intelligent aerial bomb to extinguish the crown fire which is the most difficult to fight against. The aerial bomb is a kind of cluster bomb which is carried by helicopter and airdropped over the fire ground. The series of action of cabin opening of the dispenser, ejection of the submunition, auto-throw parachute and decelerating can be completed accurately under the control of intelligent control system, which ensures the bomb explodes and disperses extinguishing agent at the height just in the crown fire, thus, the optimal fire-fighting effect can be fulfilled.The classification of the forest fire and the present development situation at home and abroad of the forest fire fighting were introduced in this paper, subsystems and conceptual model of the aerial bomb were obtained by analyzing and solving the contradiction of fire fighting process with TRIZ theory, and then the overall structure of the aerial bomb is obtained with the considering of actual situation.External ballistics model of the submunition was established to meet overall technical requirements by considering the specific conditions of flying. Parameters and curve of external ballistics was obtained via simulation with software MATLAB. The particular parameter of the parachute was obtained via calculating the external ballistics parameters. Connector between the submunition, the parachute and the projecting parachute equipment were researched according to the demand and procedure of projecting parachute.The gasbag throwing was selected as separation mode of submunition via analyzing characteristics of all kinds of separation mode. Dynamic mode of the process of submunition projecting parachute and parameters of gasbag were established by combining with external ballistic parameters. The specific design procedures of parts of separation system were described. Finally, the simulating of impacts on the system in the process of separation and parachute opening was carried out. To verify the reliability of the system, numerical simulation was carried out by means of of procedures via finite element method and software ANSYS. The result shows that intensity of system can meet all processes reliably.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  4. The Band Structure in 2D Resonant Phononic Crystal,O735
  5. Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
  6. Numerical and Experimental Studies for Multi-Cracks of Asphalt Pavement with Semi-Rigid Basement Asphalt,U416.217
  7. Applications of Vector Finite Element Method to Simulate Logging While Drilling Resistivity Tools,P631.83
  8. Study of Composite Drive Shaft for an Automobile,U465.6
  9. Finite element analysis of gear transmission machine and Kinetics,TH132.41
  10. Composite cage rotor induction motor starting performance of the design and research,TM343
  11. More rarely slot reactance permanent magnet synchronous motor parameter calculation and research,TM341
  12. Bioelectrical impedance imaging based on magnetic induction is the problem of the electromagnetic field,R310
  13. Small aperture glass-ceramics based on helium-neon laser fundamental transverse mode selected experimental study,TN248
  14. Traits of force based on the high fill Fang Gonghan ANSYS secondary development,U449
  15. Study on Temperature Effect of Porous Cement Concrete Pavement,U416.216
  16. The Dynamic Response Analysis of Cement Concrete Pavement with Function Layer,U416.216
  17. Structural Analysis and Optimization Design for Single-girder Gantry Crane with Double Hook,TH213.5
  18. Study on Electro-Thermo-Mechanical Characteristics of Semiconductor Power Devices with Graphene Layers,TN303
  19. Static and dynamic characteristics of gantry machining center structure based on finite element technology,TG659
  20. Research on the Plastic Contact Model of Cylindrical Asperities,TG84

CLC: > Agricultural Sciences > Forestry > Forest Protection > Forest fire
© 2012 www.DissertationTopic.Net  Mobile