Dissertation > Excellent graduate degree dissertation topics show
Hi-Speed ??USB BER testing and research
Author: ChenZhiYuan
Tutor: LaiJinMei;YangXuHua
School: Fudan University
Course: IC Engineering
Keywords: USB FPGA Shake Bit Error Rate Tester
CLC: TP334.7
Type: Master's thesis
Year: 2009
Downloads: 64
Quote: 1
Read: Download Dissertation
Abstract
|
USB has become the standard in the PC expansion interface, and are widely used in the computer with an external device connection and communication . USB2.0 can support a maximum data transfer rate of 480Mbps . This paper mainly discusses the high-speed USB bit error rate (BER) testing . This paper first studied the work of the Hi-Speed ??USB topology and structure of the transceiver , and high-speed USB is used to reduce the bit error NRZI with bit stuffing combination of encoding , elastic buffers are designed to achieve , at the same time , Hi-Speed ??USB signal quality tests are also analyzed . The jitter on the time and the amplitude of the noise is mainly due to errors in the communication system . In this paper, first proposed the prediction error rate jitter test methods . The main the oscilloscope test signal eye diagram , jitter and eye diagram analysis , separated by the method of probability statistics deterministic jitter , random jitter , inter-symbol interference and duty cycle distortion and periodic jitter . The application probability distribution function (PDF) the cumulative distribution function ( CDF ) curve, the prediction error rate of the communication system and analyze the impact of various noise BER error rate . In order to verify the correctness of the bit error rate prediction , designed a special USB bit error rate tester to the actual test error rate . The tester uses a combination of architecture of PC control with FPGA test . In this system , FPGA will be simultaneously connected to the data transmitting end and the receiving end of data , to form a loop . Than the statistical error rate of data sent and received data . The test results showed that both results are very consistent .
|
Related Dissertations
- Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
- Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
- Design and Application of Scope Anti-Shake System,TH743
- Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
- Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
- Development of LXI Arbitrary Waveform Generator,TM935
- Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
- Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
- Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
- Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
- Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
- Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
- Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
- Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
- Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
- Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
- Development of Serial Bus Analyzer Based on Nios,TP274
- Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
- Development of Pxibus High Performance Digital I/O Module,TP274
- Development of LXI Counter,TP274
- A Communication Board Development Based on LVDS Technology,TP273
CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Electronic digital computer (not a continuous role in computer ) > External device > Interface devices,plug-in
© 2012 www.DissertationTopic.Net Mobile
|