Dissertation > Excellent graduate degree dissertation topics show

AE Experiment Study on Damage and Failure Processes of Rock with Hole

Author: HouJiaNan
Tutor: WangShuHong
School: Northeastern University
Course: Geotechnical Engineering
Keywords: Rock damage acoustic emission (AE) numerical simulation
CLC: TU452
Type: Master's thesis
Year: 2009
Downloads: 117
Quote: 0
Read: Download Dissertation

Abstract


With the development of national economic and defense construction, people gradually recognize that the uses of underground space play an important role on the improvement of ground environment. Some scholars point out that making full use of underground spaces have gradually become the new trend of international energy saving. The mechanical properties of rock are complex and discrete for the reason that rock is a kind of heterogeneous material. The study on damage and failure process of materials has always been the hotspot and difficulty in mechanic research. The failure of rock-like solid materials is a kind of cumulative damage process. This paper combines starting fund project of education Ministry for scholars returned from abroad, which called "Disaster Mechanism and its Control Induced by Rock Engineering", with experiment study and theoretical analysis to study the damage and failure process of granite, gneiss and marble. And the research results are listed as following:Firstly, uniaxial compression tests are conducted on intact rock, and at the same time acoustic emission parameters of rock specimen, including acoustic emission (AE) experiment of rock with different lithology, different size and saturated marble, are recorded by acoustic emission experiment instrument. The experiment tests the damage and failure process with different rock specimen and it is shown that there are three obvious stages between rock stress and change rate of acoustic emission, including no significant change stage(0-50% peak strength), significant change stage(50%-90% peak strength) and before failure stage(90%-100% peak strength). To the corresponding, there are also three stages between event number of acoustic emission and loading time, including slow growth stage of acoustic emission events, steady growth stage of acoustic emission events and rapid growth stage of acoustic emission events. The effect of rock with different size on failure mode is not obvious in acoustic emission experiment with different rock size. The time of rock specimen with smaller size into significant change stage of AE events is earlier than rock with large-size. In AE experiment of saturated marble, the test results show that saturated marble entering into significant change stage and steady growth stage of AE events is earlier than unsaturated marble and there are no obvious differences of failure mode between saturated and unsaturated rock specimen.Based on the above-mentioned experiment, this paper mainly carries out AE experiment of rock with hole including rock with semi-section deep hole and rock with total cross section deep hole. The test show that there are obvious differences of failure mode between rock with hole and intact rock, rock with hole into significant change stage is earlier than intact rock. Significant change stage of rock with whole is 40%-90% peak load. Rock with hole meet the four-stage of rock brittle failure that is fracture closure stage, linear elastic deformation stage, fracture stable propagation stage and fracture unstable propagation stage. When peak strength exceeds 50%, the horizontal direction of rock with semi-section deep hole will generate obvious acoustic emission phenomena. However, when peak strength exceeds 70%, the horizontal direction of rock with total cross section deep hole will generate obvious acoustic emission phenomena.Making intensive comparative analysis on the above-mentioned test results and based on test data, this paper presents improved damage constitutive relationship model based on AE event numbers, discusses and defines the relative parameters of the model and gives stress-strain curve of intact rock specimen and rock with hole by applying this model. The curves match well with the test data.As verification and supplement of the experiment, this paper carries out numerical simulation aiming at different rock specimen by applying RFPA software, simulates the experiment process of rock with different size and rock with total cross section deep hole. The failure modes got by simulation are match with the test results.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Research on the Effects of Protection and Renovation of Apple Polyphenols on UVB-Induced HepG2 Cell Injury,S661.1
  18. Rock-fill Concrete Experiments on Comprehensive Properties and Studies on Thermal Stress,TU528
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  21. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649

CLC: > Industrial Technology > Building Science > Soil mechanics,foundation engineering > Rock ( rock ) mechanics and rock testing > Rock mechanical properties and stress theory
© 2012 www.DissertationTopic.Net  Mobile