Dissertation > Excellent graduate degree dissertation topics show

Dynamic Designanalysis and Optimization of Gantry Crane Girder Truss

Author: GuoShuJun
Tutor: ZhouXinXiang
School: Liaoning University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: truss girder finite element analysis vibration simulation PDS
CLC: TH213.5
Type: Master's thesis
Year: 2012
Downloads: 86
Quote: 1
Read: Download Dissertation

Abstract


With the vigorous development of China’s transportation industry, as an important device for lifting the crane machineries are developing toward the high-speed, heavy direction, so the mechanical performance requirements are increasing. The crane works frequently, in most cases under the dynamic load. The welded steel will be suddenly ruptured, resulting in catastrophic equipment accidents and personal injuries. The crane girder is an important metal structure to the crane. The carrying capacity often determines the main properties of cranes. Therefore, the performance of the main beam of the crane research is necessary. This topic is raised under this context and has some practical significance. In this paper, a branch of the X gantry cranes grab are studied, andwhose the main beam is a truss-style. Analysis of three working conditions, the stress and strain distribution of truss girder in each condition are gained, which tell us the position of the maximum strain, maximum stress. Through the model of dynamic analysis, the value of the first 15 natural frequencies and the first three mode shapes and map are given and are necessary reference to the future transformation of crane girder.In the project there are a lot of uncertainties. Uncertainty is the inherent characteristics of a variety of things in nature. By use of ANSYS PDS (reliability analysis), the main beam of the truss model is analyzed to know what influence of input parameters are on the performance of truss girder, and indicators of reliability analysis are used to judge the results of the analysis, thereby they can enhance the accuracy of the analysis.By use the MATLAB Simulink, the truss girder vibration velocity is simulated, and is the same as the actual measurement results, and it proves that the simulation is reliable.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Study on Reducing the Mower Vibration by Optimizing the Crank-rod Mechanism of 170F Engine,S817.111
  8. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  9. Sham hose drum drive means and hydraulic system of the structure,TE973
  10. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  11. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  12. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  13. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  14. Study on Virtual Simulation Technology of Safety Valves Based on SolidWorks,TH134
  15. Optimized Design of New Style Mast of ZJ50L Drill Rig,TE923
  16. The Structure Design and Finite Element Analysis for the Light Hydraulic Support with Auxiliary Beam,TD355.4
  17. Analysis on Static-dynamic and Fatigue Characteristics of Metallurgical Overhead Traveling Crane,TH215
  18. Research of Deep Excavation Construction Process for Nearby Subway Section Action,TU753
  19. Assessment of Shenyang 2nd Ring Road Over-line Continuous Beam Bridge Safety Based on the Test,U447
  20. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  21. The Design of Telescopic Asphalt Spraying System,U415.524

CLC: > Industrial Technology > Machinery and Instrument Industry > Lifting machinery and transport machinery > Lifting machinery > Mobile crane > Gantry ( gantry )
© 2012 www.DissertationTopic.Net  Mobile