Dissertation > Excellent graduate degree dissertation topics show

Research on Soft-switching PFC Based on Single-state Flyback Converter

Author: YangJie
Tutor: XiaoQiangZuo
School: Hunan University
Course: Power Electronics and Power Drives
Keywords: Power Factor Correction(PFC) Soft-switching Single-stage Constant-current power Saber
CLC: TM46
Type: Master's thesis
Year: 2011
Downloads: 104
Quote: 1
Read: Download Dissertation

Abstract


In order to reduce the harmonics pollution and compliance with power quality and EMC requirements of ac power system,power factor correction (PFC) must be introduced into the switching power supplies. In order to reduce the switching losses of the switching power supplies while complying with the harmonics regulation , demands for soft-switching technique become more and more important. Therefore, PFC and soft-switching techniques are two important research subjects in the field of power electronic.A high performance constant-current power with PFC and soft-switching techniques is researched in this paper. It consists of two basic units .The first unit is boost-type single-stage PFC converter ,the second unit is soft-switching technology flyback converter. A new type of PFC converter , which called soft-switching PFC based on single-stage flyback converter.First of all,the paper introduced the development of PFC technique and soft-switching technique. The operation principle and steady waveforms of various working mode of the converter is analyzed in detail.The paper discusses how to select the resonant parameters to realize the soft-switching , and the simple control circuit with designing.And then,A prototype of soft-switching PFC based on single-stage flyback converter is designed. The design method and selection of the main components is gived about the converter. At last,with the help of simulation software Saber,several key parts of the system are simulated.Experimenta waveforms are presented,at the same time, the power factor、efficiency、input regulation、load regulation and the harmonic content of input voltage and input current are tested respectively,the theoretical analysis is verified by simulation and experimental. That the performance index of the prototype achieve the design requirements is proved.A reliable and practical power is obtained.At the last of the paper,a summary about the thesis is made.Some suggestion is proposed for next work.

Related Dissertations

  1. Research on Single-stage PFC Based on Dual-MOSFET Forward Converter,TM46
  2. Study and Design on DC-DC Converter for a 1KW Solid Oxide Fuel Cell Power System,TM46
  3. The Research on Hot Swap Technology of Power Supply,TM46
  4. Single-phase Single-stage Photovoltaic Inverter Design,TM615
  5. Research on the Main Circuit of High-power Switch Mode Power Supply,TN86
  6. Simulation Study of IGBT Model,TN386
  7. Switching power saving technology,TN86
  8. The Investigation and Research on the Special Physical Quality of Elite Women Sabre Athletes of China,G885
  9. The Research of Micro-Plasma Arc Welding Transistor Power Source,TG456.2
  10. Ozone generator power inverter Research and Design,TM464
  11. Design and Simulation of 2MHz RF Power Supply for Fast Axial Flow CO2 Laser,TN248.22
  12. A Novel Daul Cuk Inverter with Wide Input Voltage,TM464
  13. The Design of Switching Power Supply Based on Active Power Factor Correction and Soft Switch Technology,TM46
  14. Application of Soft-switching Techniques in PWM Converter,TM46
  15. The Design of a Resonant Mode PWM Power Management Chip,TN86
  16. Research of Synchronous Rectification Technology High Power LED Driver,TM46
  17. Single-stage grid-connected PV system with MPPT Research and Implementation,TM615
  18. Investigation on the Control Technique of Grid-connected Inverter for Distributed Generation System Integrated with Renewable Energy,TM611
  19. Square wave inverter motor hybrid switch,TM464
  20. Research on Three-port DC/DC Converter for Hybrid Renewable Energy Generation System,TM46
  21. The Research on Control System of Resistance Spot Welding Power Based on DSP,TG453.9

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile