Dissertation > Excellent graduate degree dissertation topics show

The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers

Author: SunJiYu
Tutor: JiaLinXiang
School: Harbin Institute of Technology
Course: Refrigeration and Cryogenic Engineering
Keywords: LNG Mixed refrigerant cycle Working pressure Orthogonal experiment design Numerical simulation
CLC: TQ051.5
Type: Master's thesis
Year: 2008
Downloads: 251
Quote: 0
Read: Download Dissertation

Abstract


Liquid natural gas (LNG) has obvious advantages in storing and transporting natural gas. Compared to LNG technology in western nations, the LNG technology in China which is a new technology and developing rapidly have a shorter history and a big technology gap. There are lots of scattered and remote natural gas resources in China, which haven’t been utilized for limits of kinds of conditions, and our purpose of researching small plants of gas liquefaction is no other than to utilize these natural gas resources. Based on thermodynamics, here the simulation and optimization of the process of mixed refrigerant cycle (MRC) for small scale gas liquefaction plants have been researched.In this thesis first the history and trends of LNG technology in the world is presented, and the principle of liquefaction technology is introduced. Based on the investigation of different liquefaction technology chosen by plants of natural gas liquefaction over the world, the choosing principles for liquefaction process are presented here too. The author chooses the P-R equation to calculate the phase equilibrium properties of LNG liquefaction, and builds mathematic models for equipment modules in the liquefaction cycle, which consists of compressor、throttle valve、multi-flow heat exchanger. Considering the characteristics of natural gas resource, the author presents three flow process of mixed refrigerant cycle for small scale gas liquefaction plants, simulates and analyses the whole process based on the two steps before. Finally, the author chooses the process of turn round heat exchange mixed refrigerant cycle with propane precooling.In this thesis the working pressure analyze of turn round heat exchange mixed refrigerant cycle with propane precooling has been discussed. The author especially analyses the setting bases from the factors including: low working pressure refrigerant, high working pressure refrigerant, storing pressure. The author optimizes the process, using the minimum power of the compressor as the aim function.In this thesis, the orthogonal experiment design of the plate-fin heat exchanger which is important equipment in the liquefaction process has been done. The?result is carried out by the MATLAB programming .The optimum design Scheme is found by?visual analysis methods of orthogonal experiment design. Factors affecting degree are evaluated by variance analysis methods of orthogonal experiment design. The passage design model of local heat load balance is adopt. The author analyses which is The best passage arrangement.Finally, In this thesis, The header structure Fluid field distribution of Plate-fin heat exchanger is simulated using the commercial CFD code FLUENT. When the nozzle ratio and depth ratio is different,we can simulate different results. The simulated results show that the header structure has a large effect on fluid field.

Related Dissertations

  1. Study on Springback of High-Strength Steel Stamping,TG386
  2. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  3. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  4. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  5. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  6. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  7. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  8. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  9. Numerical Simulation of Biomass Direct Reburning,TK16
  10. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  11. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  12. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  13. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  14. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  15. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  16. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  17. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  18. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  19. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  20. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Chemical Industry > General issues > Chemical machinery and apparatus, equipment > Chemical process machinery and equipment > Heating, cooling machinery
© 2012 www.DissertationTopic.Net  Mobile