Dissertation > Excellent graduate degree dissertation topics show

Research and Design of HART Communication Module Yston SUPMAX800D Sem

Author: ZhangMeng
Tutor: YeXiNing;ZhuQiang
School: East China University of Science and Technology
Course: Control Engineering
Keywords: SUPMAX800D System HART Protocol STC single chip Microcomputer Modem Field bus
CLC: TP273.5
Type: Master's thesis
Year: 2012
Downloads: 17
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of the distributed control system, the distributed control system I/O card a processing signal speed and precision, technical requirements more and more is also high. It is very important that the module on Supmax800D system has the speed and precision, with low cost, low consumption and high safety features。If applied to the industrial control systems, can greatly reduce the cost and difficulty of maintenance system, and so on it has important theoretical and practical value.This paper introduces the system cards SUPMAX800D research background and significance, but also introduced SUPMAX800D system development, and field bus technology and HART communication protocols are outlined. HART communication card device information is mainly collected, and collected real-time data transmission to the host computer. Therefore, from the HART communication card to achieve functional characteristics, to determine the overall design of the HART card program, using the three-channel plate structure, the middle layer of the CPU channel plate, the other two floor is common I/O channel plate. Then details the system hardware design, software design, and focus on the HART communication card and host computer communication technology. The hardware design section, select the STC12C5A32S2 microcontroller as the main processor chip, A5191HRT as a modem chip, a detailed description of the HART communication card microcontroller module and modem module and other auxiliary module circuit design, and gives the DIN rail connection device program. Software gives the main part of the design process, and the block diagram of each module, and introduced the 485 data processing functions, such as serial port interrupt function block programming. Finally, the HART communication cards made PC software design, gives the overall structure PC software, and describes its main module to send data, read data modules and configure the device information module, given the specific configuration.This last communication on HART communication card function tests, mainly HART communication card and host computer communication and HART communication card and the next crew of communication were tested, the results of experimental data to achieve the design requirements.

Related Dissertations

  1. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  2. The Study Intelligent Pressure Transmitter Based on Hart Protocol,TP212.6
  3. Ultrasound-based intelligent heat meter,TH81
  4. 3G mobile phone functions to achieve convergence on the card,TN929.53
  5. A Study on Modern Chinese Spatial Words Acquisition of the Minority Students in Xinjiang,H146
  6. Research of the Mine Safety Monitoring System Based on Zigbee’s Sensor Network,TP212.9;TP274
  7. Design and Implementation of a SNMP-based Cable Modem Network Monitor and Management System,TN943.6
  8. Based on the J2EE Platform with Mobile Phone Short Message of Universities Employment Service System,TP311.52
  9. Development of Prediction System and Its Application in Heilongjiang Rice Blast,S435.111.41
  10. Realization of Burst Mode Communication Modem Technology,TN915.05
  11. Development of Isolated HART Temperature Transmitter,TP212
  12. Design and Implementation of Remote Intelligent Voice Acquisition,TN912.3
  13. Design and Implementation of Wirless Analog Fax Based on CDMA Network,TN929.533
  14. Design of Current Analog Output and Redundant DCS Interface Based on HART Protocol,TP273
  15. The Design of Data Remote Transmission System in Coal Mine Based on μC/OS-II,TP274
  16. Design and Implementation of Wireless Data Transmission Scheme Based on Shortwave Radio,TN919.72
  17. PUSH technology and its SMS-based asynchronous communication in mobile networks in research and application,TP311.52
  18. Design and FPGA Implementation of Multi-channel Power Line Carrier Communication System,TN913.6
  19. Intelligent Valve Positioner Based on HART Protocol,TP273
  20. FPGA-based system of communication principle experiment,TN911-4

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile