Dissertation > Excellent graduate degree dissertation topics show

The Application of Siemens S7-300 PLC to Control System of Process (Laboratory Tank Level)

Author: XuLi
Tutor: WuQingHong
School: Liaoning University of Science and Technology
Course: Control Engineering
Keywords: S7-300 PLC PID Process Control Liqid Level WinCC
CLC: TP273.5
Type: Master's thesis
Year: 2012
Downloads: 137
Quote: 0
Read: Download Dissertation

Abstract


This paper introduces the process control system (PID control system) which is realized by Siemens S7-300 PLC and WINCC. In the system hardware configuration, CPU315-2DP which integrates PROFINET interface is adoptde.PROFIBUS and industrial Ethernet are both come into consideration.and describe the hardware and STEP 7 which is used to programming.To introduced emphatically the application of the module SFB41 (function block).The parameter settings and programming of the SFB41 .In the same time ,it also desicribes the hardware configuration,software configuration,net connection,control function,the working process and the adjusting function of the liquid level’s variable frequency speed regulating PID control. S7-300 PLC control the MM440 inverter via the PROFIBUS-DP protocol.The good performance of control can be seen since its application and automatic ingredient control can be aslo realized, and the purpose of increasing the control level can be reached.The paper also introduces that how to use WinCC (Windows Control Center )to collect the data from different types based on OPC technology and database skills.In the parameter settings of hardware and WinCC,the alarm messages is described and discuss the main effect. The system can be realize the remote monitor, and also realize the data collect, record and print for the Manufacture Execute System.The data of the experiment is arrived the requirements of the control system.

Related Dissertations

  1. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  2. Design of Control System for Laser Beam Steering Device,TM301.2
  3. Research and Design for the Laser’s Power Control System of Laser Direct Writing,TN249
  4. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  5. Research on Ducted Fan Unmanned Vehicle Autonomous Modeling and Control Strategies,V249.122
  6. Research on Temperature Control System for Laser Diode,TP273
  7. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  8. Design and Study of Temperature Chamber Control System in Servo Table,TP273
  9. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  10. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  11. Research and Design of One Kind of Paper’s QCS That Based on Embedded System,TP368.1
  12. Study of Synchronous Generator Excitation Control Based on Neural Network Identification,TM31
  13. Evaluation on Stability of Threshing and Redrying Lamina Structure of Tobacco,TS443
  14. A Control Chart for Simultaneously Monitoring the Time Interval and Size of an Event,X924
  15. Cost Control of government statistical work,C829.2
  16. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  17. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  18. The Product Quality Improvement Study Based on SPC and DMAIC,F224
  19. Brushless DC Motor and Control System,TM33
  20. The Development of Linear Motor Cooling Controllers Based on DSP,TM359.4
  21. Design Control Algorithm of A Dynamic Positioning System for the Large Trailing Suction Hopper Dredger,U674.31

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile