Dissertation > Excellent graduate degree dissertation topics show

Research on Adaptive Inverse Control for the Hysteresis and Creep Characteristics of IPMC

Author: LiZhi
Tutor: HaoLiNa
School: Northeastern University
Course: Pattern Recognition and Intelligent Systems
Keywords: IPMC hysteresis creep adaptive inverse control DSP control system
CLC: TP273.2
Type: Master's thesis
Year: 2009
Downloads: 12
Quote: 0
Read: Download Dissertation

Abstract


IPMC (Ion-exchange polymer metal composite)is one kind of novel artificial intelligent materials. It has a lot of good properties, such as light weight, good flexibility, easily cut in any size and shape, and generating a large displacement when applied a low drive voltage. More importantly the performance of IPMC is similar to human muscle, so it is called artificial muscle. Hence, it is meaningful to research the property of IPMC in the fields of Micro-Electro-Mechanical System(MEMS), biological Medical and so on.This thesis firstly introduced three familiar hysteresis models:Preisach model,KP model and PI model, analyzed the properties of each model, and applied PI model to build the hysteresis property of IPMC in on-line identification. This thesis also explained the reason why the creep phenomenon happened in IPMC, introduced two familiar creep model, according to their properties chose the right one for the creep property of IPMC, and simulated by MATLAB. Finally, we added the hysteresis PI model and liner creep model to build the mix model of hysteresis and creep property of IPMC.Secondly this thesis applied on-line and off-line identification method to identify the parameters of hysteresis and creep model based on IPMC, selected LMS self-adapting filter method to identify the parameters of PI model, applied recursive weighted least squares algorithm to identify the parameter of creep model, and testified that the identification curve generated by the mix model is quite similar to the output curve of IPMC.Then this thesis employed adaptive inverse control strategy to compensate the hysteresis and creep property of IPMC. Built two adaptive inverse control structures, for the first one proved the existence and input and output stability of the inverse controller, deduced solution of the inverse controller simulate this control process with the m file of MATLAB and got good simulation results. Then revised the first structure to get a new structure, which had a higher operation speed than the first structure but at the expense of accuracy. Finally, applied MATLAB/SIMULINK to simulate the second control structure and got good simulation results.At last, this thesis used a SEED-DEC2812 DSP developing board to establish an adaptive inverse control system based on the property of hysteresis and creep of IPMC, got the experimental results and analyzed them.

Related Dissertations

  1. A Study on Thermal-Mechanical Damage Behaviour of 60Si2Mn Steel,TG142.15
  2. Research of the Performances of Ferroelectric Film and Compositional-Graded Ferroelectric Film,TM221
  3. Research on Compensation of Hysteresis in Piezoceramic Actuators,TM282
  4. The Study on the Creep Resistance Property of Ultra-High Molecular Weight Polyethylene Fiber,TQ342.61
  5. The Research of Concrete Shrinkage and Creep Experiment,TU528
  6. A Novel Controller Design for Active Power Filter with Low Switching Loss,TN713.8
  7. Design A Hybrid Micro-force Sensor Integrated Actuating & Sensing,TP212
  8. Numerical Analysis Method and Application for Creep Damage of Asphalt Mixture,O346.1
  9. Preparation and Properties Research of Ba0.8 Sr0.2 Tio3 /CoFe2O4 Multi-iron Thin Films,O484.1
  10. Research on Thin-Film Hysteresis Loop Measurement System Based on Extraordinary Hall Effect,O484.43
  11. Development of Electric Actuator Servo System,TM921.541
  12. Hysteresis -based optimization of vehicle routing problem,O224
  13. Uniform deformation laminate interlaminar stresses Numerical simulation and high-temperature creep behavior of 40Cr steel,TB33
  14. Research on High-precision Measurement and Modeling of High Voltage Electric Transformers,TM452
  15. Rubber isolator nonlinear theoretical modeling and experimental study of impact,TB535.1
  16. Study on 3D Protein Folding Problem Based on the Improved Hysteretic Optimization,TP301.6
  17. Elements Re nickel base single crystal alloy temperature creep behavior of,TG146.15
  18. GH4169G alloy creep behavior of the organizational structure and,TG146
  19. Fuel cell vehicles with high-frequency inverter system harmonic analysis and suppression,TM464
  20. Experimental research of Beijing - Shanghai high-speed railway in deep soft soil section bridge foundation,U443.15

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Adaptive ( self- tuning ) control,adaptive control ( self-tuning ) system
© 2012 www.DissertationTopic.Net  Mobile