Dissertation > Excellent graduate degree dissertation topics show
Research of BLDC Motor Speed Control System Based on Sensorless Technology
Author: HuangGuoHui
Tutor: LiTieCai
School: Harbin Institute of Technology
Course: Electrical Engineering
Keywords: Air conditioning compressor Brushless DC motor PWM modulation No position sensor
CLC: TM33
Type: Master's thesis
Year: 2008
Downloads: 236
Quote: 0
Read: Download Dissertation
Abstract
|
Has been increasing along with increasing living standards and the global warming trend , the increasing demand of the people on the air conditioner at the same time , along with the deepening of the growing tension of the world's energy and understanding of the concept of energy efficient air conditioners inverter technology for its high efficiency , low energy consumption characteristics and advantages by pro-gaze of the major air conditioning manufacturers , has become the first choice for the mainstream air conditioners control technology . The purpose of this project is to use the air conditioning compressor inverter control technology to design a sensorless brushless DC motor speed control system . Firstly, according to the design features and indicators of the overall design of the speed control system , emphatically describes the system solution for current measurement , position detection solutions and PWM modulation current , speed , double-loop control strategy , hardware , software and overall program the important and difficult aspects of the design were introduced and analyzed . Then , the overall design of the program based on the design of the hardware circuit , flyback switching power supply module transformer calculation of parameters used in the papers focus on the system and the core material selection , selection of rectifier and position detection circuit used the third-order low-pass filter circuit design was introduced , and also completed a driver circuit , control circuit and undervoltage protection circuit design and schematic drawing . Secondly, for the present system needs to implement the function of a part of the design of the software . Lower machine main cycling program and the \Erected a system experiment platform , system soft FBI hardware debugging through the PI parameters , the system reached a preliminary performance requirements , and to prove the feasibility of the program .
|
Related Dissertations
- A brushless DC motor driver of the modulation method and,TM33
- Efficient brushless DC motor control system design and research,TM33
- Brushless DC Motor Based on DSP Control System institutions,TM33
- Research and Implementation of Automatic Clutch in Hybrid Electronic Vehicle,U463.211
- Automatic dual-axis solar tracking independent control system design,TM615
- DsPIC based brushless DC motor control system design,TM33
- Based on sigma-delta modulation , low noise , high efficiency buck DC-DC converter with,TM46
- The Study of Micro Electrical Energy Storage System,TM92
- Research and Design of A High Efficiency and High Step-up Ratio Converter Based on BOOST DC-DC,TM46
- Reducing Torque Ripple of Brushless DC Motors with Bi-Directional DC/DC Converter,TM33
- Dual dual- carrier modulation wave PWM Method,TM464
- Control of brushless DC motor based on DSP,TM33
- The Design of White LED Driving IC Based on LDO,TN312.8
- Study on Torque Ripple Suppression Technique of Permanent Magnet Brushless DC Motor,TM33
- Position Sensorless Control for BLDCM Based on BP Neural Network,TM33
- Single Injection hybrid APF Design and Research,TN713.8
- Analysis and Design of A High Efficiency Step-down DC-DC Converter,TN402
- Study on Simulating of the Dynamic Driving System of In-Wheel Driven Electronic Vehicle Based on the Electronic Differential System,U469.72
- The Research of Bldcm Servo System Based on Sliding Mode Control,TM33
- Study on Sensorless Vector Control System of High Speed PMSM,TM341
CLC: > Industrial Technology > Electrotechnical > Motor > DC motor
© 2012 www.DissertationTopic.Net Mobile
|