Dissertation > Excellent graduate degree dissertation topics show

The Effect on Microtexture of Fine Grain High Strength IF Steel after Annealing

Author: ZhangLiWen
Tutor: WangZhenMin
School: Liaoning University of Science and Technology
Course: Materials Processing Engineering
Keywords: Fine grain high-strength IF steel annealing time EBSD texture
CLC: TG156.2
Type: Master's thesis
Year: 2012
Downloads: 110
Quote: 0
Read: Download Dissertation

Abstract


In this paper, the fine grain high-strength IF steels were adopted as tested steels.The annealing experiments were carried out by continuous annealing and laboratory simulated annealing two different process conditions. The microstructure and recrystallization texture orientations of tested steels were observed by OM, TEM, EBSD and other analytical techniques and the recrystallization texture orientation were analysed by OIM5.31 software. The influence to the tested steels of the microstructure and recrystallization texture which under different holding time in this two kinds annealing processes was comparative analysed. And then we can obtain the grain boundary character distribution of recrystallization texture during continuous annealing.The holding time of continuous annealing has a significant effect to the performance of the tested steels. For the carbon content of 0.007%, adding 0.1% Nb 1# tested steel, which is experimented by continuous annealing after cold rolling.When the annealing temperature reach 850℃, the holding time reach 120s, the test steel has a strong {111} texture and plastic strain ratio (r value) reach to the maximum value.It can be observed that extend the holding time has little effect on the ferrite organization of the 1# tested steel. For the carbon content of 0.043%, adding 0.097% Nb 2# tested steel, which is experimented by laboratory simulated box annealing after cold rolling.When the annealing temperature reach 850℃, the holding time reach 300s and 600s, the test steel has a strong {111} texture and the recrystallization texture near the < 111 > / / ND orientation with a high density. In both annealing process, the tested steel have taken place texture“diffuse phenomenon”with the change of holding time. And this“diffuse phenomenon”mainly transformed between {112} face texture and {111} face texture.When the annealing temperature of 1# tested steel after continuous annealing time reached 850℃,the holding time reached 120s, the tested steels received good texture .At the same time, the lowΣCSL andΣ13 total content of 1# tested steel is higher,the tested steel has better distribution characteristics of grain boundaries, the more superior deep-drawing performance and lower sensitivity of secondary working embrittlement.

Related Dissertations

  1. Video Coding Research Based on Texture Characteristics,TP391.41
  2. The Research of the Text Extraction Method Based on Spectral Cut,TP391.41
  3. Studies on Changes of Quality Characters and Prediction Model of Postharvest Tomato Fruit,S641.2
  4. The Research on Texture Synthesis Technology from Cloud Theory & Been Evolution Genetic Algorithm,TP391.41
  5. Research on Theory of Granular Computing and Its Application on Image Retrieval,TP18
  6. Effect of Processing Technology and Formula Composition on Quality of the Neutral Dairy Desserts,TS252
  7. Based on image feature extraction algorithm design and application,TP391.41
  8. The Texture Research on Low Grade Non-oriented Silicon Steel,TG142.1
  9. Algorithms and Software for Areal Surface Texture Analysis and Evaluation,TP311.52
  10. Chip Seal Endurance Test Method,U418.6
  11. FePt / CoFe magnetic composite membrane dynamics of laser pump-probe,O484.43
  12. The Reaserch of Processing Technology Optimization and Verification of Cheddar Processed Cheese,TS252.53
  13. Study on the Tire Road Noise Characteristics of Intermittent Graded Asphalt Mixture,U461.51
  14. Research on Application of Fractional Differential to Digital Image Processing and Support Vector Machine to Face Recognition,TP391.41
  15. 10CrNi5Mo steel special plate of the relationship between the organization and the performance,TG142.1
  16. Effect of Soil Texture and Phosphate Fertilizer Rate on Phosphorus Availability in Xinjiang Cotton Field,S158
  17. Research on the Edit Propagation for Certain Types of Images,TP391.41
  18. Preparation and Ripening Characterization of Fuctional Low-fat Cheese with Lactobacillus Acidophilus,TS252.53
  19. Composite extruded aluminum alloy and performance of the preparation of ultrafine-grained microstructure evolution studies,TG379
  20. Recrystallization Texture Evolution during Grain Growth in Asymmetrically Cold Rolled Grain-Oriented Silicon Steel,TG335

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Heat treatment > Heat treatment process > Annealing
© 2012 www.DissertationTopic.Net  Mobile