Dissertation > Excellent graduate degree dissertation topics show

Research of Material Mechanical Properties by Small Punch Testing

Author: ZouXiaoHui
Tutor: GuanKaiShu
School: East China University of Science and Technology
Course: Safety Technology and Engineering
Keywords: small punch test elastic modulus yield strength fracture toughness fracture appearance
CLC: TG115.5
Type: Master's thesis
Year: 2012
Downloads: 77
Quote: 2
Read: Download Dissertation

Abstract


Small Punch Testing (SPT) is one of the miniature specimen method to evaluate the mechanical property of in-service components. Due to the small size of the specimen, small punch test has a great application value in evaluating of mechanical properties of in-service pressure equipment.Small Punch tests, standard tensile test and fracture toughness tests were carried out in this paper. A lot of mechanical properties of materials were obtained. According to the analysis of the data, the main results were shown in the following:1). Formular about the elastic modulus by the SPT was deduced based on the model of simplified bending theory of the thin plane. A theoretical calculation between the slop(P/δ) of the first stage of SPT load-displacement curve and the elastic modulus was established.2). The yield load was proposed using a method of "the least square method". This method is easy to operate and can quickly get the yield load(Fp). As result of the analysis, the empirical linear relationship between the Fp and yield strength Rel can be expressed.3). The empirical correlation between Pmax and ultimate strength Rmax was established4). The relationship between the percentage elongation after fracture and the the length of arc after fracture of SPT was established.5).The existence of a significant relationship between the equivalent fracture strain at the point of failure(εeqf) and the conventional fracture toughness(JIC) was created. Size affects of SPT was studied. Small punch samples of small size show dimple fractures whereas large fracture toughness samples show quasi-cleavage fractures.

Related Dissertations

  1. Modelling and Development of Simulation Software of Rolling Mill Bending Roller Control System,TG334.9
  2. Effects of Environments on Fracture Toughness and Fracture Behavior of 304 Stainless Steel,TG142.71
  3. First-principles Study on the Influence of Doping on the Strength of Super-hard Materials,O469
  4. Evaluation of Material Mechanical Properties by Small Punch Test at Low Temperatures,TG115.5
  5. Asymptotic Expansion Homogenization and its Applications in Elastic Modulus of Cancellous Bone,R312
  6. PTT / PET composite fibers and fabrics juxtaposed Elasticity,TS156
  7. Research on Durability Evaluation Method of Cement Concrete Pavement,U416.216
  8. The Performance Research of Stay Cable Strengthened with CFRP,U443.38
  9. Research on Tensile Strain Variation of the Bottom Layer of Layered Pavement Structure Simulation,U416.217
  10. Comparative Research of Carotid Artery Elasticity between Hypertention and Prehypertention Groups in County Community of Shandong Province,R544.1
  11. Effects of the Coating on the Properties of Electro-Magneto-Elastic Composites,O343.7
  12. Of TiC Reinforced relative Mo alloy mechanical properties and microstructure,TG146.412
  13. Preparation of Nano-copper Thin Film and Basic Research of Its Laser Shock Modifing,TB383.1
  14. Experimental Study on Properties of Rubber Aggregate Plastic Concrete,TU528.41
  15. The Impact of Rubber Particle Size on the Mechanical Properties of Roller Compacted Rubberized Concrete (RCR),TU528.57
  16. Research on the Mr Damper Control System and Experiment of Shear-type Mr Damper,TB535.1
  17. Study on the Mix Proportion and Durability of Cement Concrete Pavement,U416.216
  18. Effect of Niobium and Heat Treatments on Microstructure and Mechanical Properties of Cryogenic Steels,TG142.1
  19. Research on Mechanics Performance of Cement and Downhole Working Load Adaptability,TE256
  20. Fabrication and Mechanical Properties of ZrO2 /NiAl Matrix Composites,TB331
  21. The Preparation of Carbon/Polymer Composite and Its Properties,TB33

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallurgy ( Physical Metallurgy ) > Analytical tests of the metal (Metal Testing and Materials ) > Mechanical properties ( mechanical properties ) test
© 2012 www.DissertationTopic.Net  Mobile