Dissertation > Excellent graduate degree dissertation topics show

Study on Amorphous Formation Ability and Performance of Pt-Pd-Cu-P Alloys

Author: AoPeiYun
Tutor: ZhangAiYun；WuShengHu
School: Nanchang University
Course:
Keywords: Pt-based alloy bulk glass alloy glass-forming ability mechanical property corrosion resistance
CLC: TG139.8
Type: Master's thesis
Year: 2011
Downloads: 14
Quote: 0
Read: Download Dissertation

Abstract


Pt-based alloys possess high glass-forming ability(GFA) and Pt-based metallic glasses can be used in various fields. In this work, new Pt-based Pt-Pd-Cu-P and Pt-Pd-Cu-Ni-P bulk glassy alloys were developed and their GFA, thermal properties and mechanical as well as chemical properties were evaluated.The Pt-based alloys were prepared by rapid solification and copper mould casting methods. X-ray diffractometry (XRD), differential scanning calorimetry (DSC), differential thermal analysis (DTA) and scanning electron microscope were employed to characterize the GFA and thermal properties of Pt-based glassy alloys. The main results are as followings:1) Glassy alloys in Pt-Pd-Cu-P system were developed. In the alloy system, Pt4oPd2oCu2oP2o has the highest glass-forming ability and the glass transition temperature (Tg) is 533K, the crystallization temperature (Tx) is 603K, the supercooled liquid regionΔTX(Tx-Tg) is 70K, the liquidus T1 is 823K and the reduced glass transition temperature Tg/T1 is 0.65, respectively. It was also found that theΔTx of Pt33Pd22Cu22P23 glassy alloys is up to 112K, which is the widest for the glassy alloys in the Pt-Pd-Cu-P system.2) The addition of Ni to the Pt-Pd-Cu-P alloys for replacing a portion of Cu enhanced the glass forming ability. In the Pt40Pd20Cu20-xNixP2o system, Pt40Pd20Cu15 Ni5P2o alloy possessed the highest GFA. For the Pt4oPd2oCui5 Ni5P2o glassy alloy, the Tg,ΔTx, T1 and Tg/T1 are 91K,784K,531K and 0.69, respectively.3) The Pt-Pd-Cu-P bulk glassy have good mechanical properties. The compressive fracture strength in the range of 1200-1400Mpa and the Young’s modulus is around 80 Gpa. The Pt-based glassy alloys also exhibited high corrosion resistance 0.3 V in the corrosive 12 N HCl solution. The open circuit potential of the glassy alloy containing 23 at% P is up to 0.8V.

Related Dissertations

  1. Investigations of Structure and Glass Forming Abilty of Amorphous Alloys,TG139.8
  2. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  3. Study of the Preparation and Properties of the Trivalent Chromium Black Passivation with Non-cobalt Sulfate System,TG174.4
  4. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  5. Electroless Ni-Pon the Bulk Nanocrystalline Ingot Iron,TQ153.1
  6. Study on Corrosion Resistance and Condensation Property of Ni-P/Nano SiO2 Composite Coatings,TG174.4
  7. Studies on Hard Films of Stainless Steel by Magnetron Sputtering,TG174.44
  8. AZ31 magnesium alloy surface corrosion Coating and Corrosion Resistance,TG174.4
  9. Study on the Ni-nWC Nano-Composite Coating by Electroplating,TG174.4
  10. Tribological Properties and Corrosion Resistance to Molten Steel of （ZrB2-ZrO2）/BN Composites,TB332
  11. Hydroxyapatite Coating Prepared on Porous Titanium Substrate by Sol-gel,R318.08
  12. Study on the Self-bonding Property of Non-wood Plant-based Particles/Powders,TS653
  13. Study on Microstructure and Mechnical Properties of Ti_f/Al Composites,TB331
  14. The Study on Fabrication of SiC_p Reinforced Magnesium Composites by Powder Extrusion Technology,TB331
  15. The Study on the Microstructure and Properties of 3D-Meshy SiC/Cu Composite Material,TB333
  16. Investigation of Phosphating Treatment of Sodium Dihydrogen Phosphate and Adhesive Performance of AZ31 Mg Alloy,TG146.22
  17. Preparation and Protection of Silane Hybrid Film on Alloy,TG174.4
  18. The Study of Preparation and Corrosion Resistance of Cobalt-nickel-plated Steel Strip for Lithium-ion Battery Shell,TG174.4
  19. Mg_2B_2O_5w/AZ91D magnesium-based composite material and its corrosion resistance of anodized film studies,TB331
  20. Properties Research of Die-casting AZ91 Mg Alloy Based on Carbon Nanotube Composites,TB33
  21. Effect of Annealing Treatment on Electronic Work Function and the Related Properties of Bulk Metallic Glass,TG139.8

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > The alloy learn with a variety of properties of alloys > Other special nature of the alloy > Amorphous alloy
© 2012 www.DissertationTopic.Net  Mobile