Dissertation > Excellent graduate degree dissertation topics show

The Temperature and Flow Field Simulation of Hot Air Heating for a Tall Building

Author: YaoPeng
Tutor: ZhangZhenWei
School: Northeastern University
Course: Mechanical Design and Theory
Keywords: hot air heating tall building numerical simulation temperature field flow fieid
CLC: TU832
Type: Master's thesis
Year: 2011
Downloads: 53
Quote: 0
Read: Download Dissertation

Abstract


Hot air heating is a new heating system. It is heat medium. Firstly, it heats air. Then the hot air will be sent into the room. Hot air temperature is higher than indoor temperature and hot air mixes with indoor air. Hot air compensates for the heat loss of the room by its energy, maintaining required indoor temperature so as to achieve the purpose of heating.The paper simulates the flow field and temperature field of hot air heating tall building. And then it analyses the simulation results. The design of the hot wind heating system has a guiding significance.This article uses the CFD method. It uses computational fluid dynamics software ANSYS-FLUENT to simulate the flow field and temperature field of hot air heating tall building, and gets specific temperature and velocity distribution in the factory. Through the simulation results of the analysis, it proofs the feasibility of the hot air heating application in tall space building.In this paper, the hot air heating factory of unilateral return air is simulated. When the building body temperature arrives at 5℃,10℃,15℃,18℃and 20℃, the temperature and velocity distribution in the entire factory was analyzed respectively. It finds out the nonuniform temperature area of the factory. It gets each required time when temperature to meet the requirements of values. It puts forward that the best heating time is 504s when the distance between air ports and ground is 0.5m. At the same time, the factory heating temperature is up to 10℃and the temperature and velocity gradient value is very small. The heating effect is the best.Through the analysis of different conditions, when temperature is up to 5℃and air ports height changes from 0.5m to 4m, it can get the best effect of air heating when air ports height is 4m.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  10. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  11. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  12. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  13. Numerical Simulation of Biomass Direct Reburning,TK16
  14. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  15. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  16. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  17. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  18. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  19. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  20. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  21. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3

CLC: > Industrial Technology > Building Science > Housing construction equipment > Air-conditioning, heating, ventilation,and its equipment > Heating
© 2012 www.DissertationTopic.Net  Mobile