Dissertation > Excellent graduate degree dissertation topics show

Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode

Author: XuQiWei
Tutor: SunLi
School: Harbin Institute of Technology
Course: Motor and electrical
Keywords: Vector control MRAS rotor flux observer convertion of multi-bus protocol
CLC: TM346
Type: Master's thesis
Year: 2008
Downloads: 72
Quote: 0
Read: Download Dissertation

Abstract


With the development of industry technology, the requirement of operation performance and long-distance control performance is improved greatly. Because of its good performance, the induction motor variable frequency drive system is applied widely in industrial control field. To make induction motor have better performance, the vector control system which uses rotor flux adaptive observer and the network control technology which contains many fieldbus protocols are deeply researched in this paper. The induction motor can have good operation performance in many fieldbus.Firstly, the induction motor mathematical model is provided in the three-phase static coordinate and two-phase rotating coordinate. Analyzing the vector control base on rotor flux orientation, this paper designs the double closed-loop system with the flux and torque as the inner-loop and the speed as the outer-loop, eliminating the coupling between torque and flux.Secondly, based on analyzing the tradition ways of rotor flux observer, this paper uses model reference adaptive system to observe rotor flux. In the rotor coordinate, this paper establishes the rotor flux observer, then proves the system stability and the parameters convergent by Lyapunov stabilization theoryПBased on the theoretical analysis, the simulation researches on the steady-state performance and dynamic characteristics of the induction motor vector control.Thirdly, the networked control system is introduced into induction motor variable frequency drive system. By the designing of a protocol converter which realizes the conversion from RS485, MODBUS and CAN fieldbus to RS232, induction motor can separately work in the three fieldbus.Finally, Using the TMS320F2812 digital signal process as the control unit, the experiment system is achieved. The experimental results prove the correctness and practicability of the induction motor vector control system designed based on multi-bus protocols.

Related Dissertations

  1. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  2. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  3. Research on Vector Control System of Induction Motor Based on DSP,TM346
  4. The Research of Control System of Permanent Magnet Synchronous Motor Based on DSP,TM383.42
  5. A Project about Intergrative Control System of Elevator Drive and Power Feedback,TP273
  6. Study of Dynamic Simulation Experimentation on Flexible Power Conditioner Based on Flywheel Energy Storage,TM761.1
  7. Research on Matrix Converter Fed Induction Motor Vector Control System,TM346
  8. Design and Implementation on Drive Control System of Industrial Sewing Machine,TP273
  9. Research on Air Gap Flux Oriented Vector Control Techniques of Synchronous Motor,TM341
  10. Wind power wind simulation system development,TM614
  11. Phase permanent magnet synchronous motor servo control system design and simulation,TM341
  12. PMSM Vector Control System,TM341
  13. LMI-based magnetic levitation magnet linear servo system H_ ∞ Control for,TM359.4
  14. Study of the Digital Design Method to Ship Electric Propulsion System,U664.14
  15. The Research of PMSM Vector Control System Based on Sliding Mode Variable Structure Control,TM341
  16. Research on Fuzzy Control of Electric Pitch Control System,TP273.4
  17. Study on Real-Time Simulation and Modeling of VSCF Wind Turbine Group System,TM614
  18. Development of Sensorless Control System for PMSM in Air-condition Compressor,TM341
  19. Research and Design on PMSM Vector Control System Based on Sliding Mode Observer,TM341
  20. Research on Speed-Sensorless Vector Control System for Asynchronous Motor,TM343

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor > Induction motor
© 2012 www.DissertationTopic.Net  Mobile