Dissertation > Excellent graduate degree dissertation topics show

Study on Multi-axis NC Tool Path Generation for Large-scale Fixed-pitch Propeller

Author: HuangKe
Tutor: PengFangZuo；YangJianZhong
School: Huazhong University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: Fixed-pitch Propeller Overlap area OBB Octree Interference check Tool-path
CLC: TG659
Type: Master's thesis
Year: 2011
Downloads: 80
Quote: 0
Read: Download Dissertation

Abstract


Large-scale fixed-pitch propeller is a key component of ship’s power machinery. The machining accuracy and surface quality of propeller determine the development of the shipbuilding industry. In our country most large-scale fixed pitch propeller are still using the traditional processing technology. Multi-axis CNC machining technology only occupy a litter percentage in the whole processing. Fixed-pitch propeller machining process and tool path generation are presented in this paper. On the basis of above research work, a programming prototype system for propeller is developed.The NC machining process strategies are established by analyzing the geometric properties of surface of fixed-pitch propeller to solve uneven allowance and large interference area. The process scheme has been verified in Zhenjiang Propeller Company.In order to solve the gouging and collision problems, an interference detection and avoidance algorithm for propeller is presented. Firstly the OBB boxes are constructed between the tool and workpiece. Then workpiece OBB box is partitioned by Octree structure. Finally, the interference triangular facets are found out by Separating Axis Theorem which can be used to judge whether there has been interference between tool and workpiece. Not only this algorithm can be used to divide the propeller region, machine tool simulation, but also be used for the generation for interference-free tool path.Technique of tool path generation for the propeller is described. A tool path generation algorithm for Filleted endmills is proposed. After searching the triangular facets using OBB box, and then the axial distance is calculated based on the analytical method. Flat cutter, as the special case of Filleted endmills, is also researched in this chapter.Finally, the programming prototype system for propeller is developed based on ACIS and HOOPS, VC++ and BCG to realize the regional division of a large propeller and tool path generation. Experiments were conducted to validate the algorithm mentioned above.

Related Dissertations

  1. CAD/CAPP/CAM Integrated System Development for Key Components in Marine Diesel,U664.121
  2. Tool Path Planning for Multi-axis NC Machining Based on Closed-loop Stiffness Model,TG659
  3. Driverless smart car modeling and three-dimensional environment map building,P285
  4. Automatic generation of three-dimensional animated virtual characters Path Planning and Implementation,TP391.41
  5. Preliminary Study of Real-time Evolutionary Location Method in 3D Complicated Medium,P315.7
  6. Path Planning for Underwater Vehicle Based on Double Propagation Wave Algorithm,TP242
  7. A Surface Reconstruction of Point Clouds Based on Spacial Status Octree,TP391.41
  8. Research of Virtual Assembly System Based on Data Glove and OBB Algorithm,TP391.9
  9. GPU-based implementation of adaptive octree texture painting technology research,TP391.41
  10. The Research and Realization of Game Engine Based on DirectX 3D,TP311.52
  11. Research on Point Cloud Matching Method Based on Dual Quaternion Algorithm,TP391.41
  12. Large amount of data airborne laser point clouds Quick View Technology,P208
  13. The Research on Ray Casting for Visualization of Anatomical Structures Based on the GPU,TP391.41
  14. Multi-scale Data Organization and Visualization of Lithospheric Plates Based on SDOG,P208
  15. Research on 3-D Reconstruction from Point Cloud,TP391.41
  16. Research of Acceleration Structures for Dynamic Scenes Based on Ray Tracing,TP391.41
  17. An Intelligent Algorithm of Collision Interference Detection for 5-axis NC Machining Based on Triangle-facet Intersection,TG659
  18. Research on Tarnish and Corrosion of Copper Surface Based on Image Processing,TP391.41
  19. The Study and Implementation of Collision Detection in Computer Aided Automatic Animation Generation System,TP391.41
  20. 3D Simulation of Ship-Bridge Collision,TP391.9
  21. Application Research of Seismic Data Volume Rendering Technology in the Exploration Decision Support System,P631.4

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile