Dissertation > Excellent graduate degree dissertation topics show

The Research for Detecting Techniques of NC Device’s Technical Specifications

Author: ZuoChangHao
Tutor: ZhouHuiCheng
School: Huazhong University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: NC device digital detection platform electromechanical system simulation detection algorithm test drive improvement
CLC: TG659
Type: Master's thesis
Year: 2011
Downloads: 39
Quote: 0
Read: Download Dissertation

Abstract


The performance of CNC device technical specifications directly affects the efficiency and precision of machining parts. It is of great significance to investigate and improve the separate detection method of technical specifications,contribute to narrow the gap with foreign high-end CNC device.Currently, separate detection methods for technical specifications of NC device are scarce. Processing test parts on the actual machine or using high precision measuring instrument such as circular grating meter to detection, the test results include comprehensive evaluation of NC devices, servo systems, and machine tool drive mechanism. It’s not accurate to evaluate the specifications by the results. Detection platform is set up by building the models of servo systems and machine tool drive mechanism to realize objective detection.The function of electromechanical system simulation module is fulfilled by building multi-axis electromechanical system model and RTW technology. Model parameters validation is realized by VC and Matlab cross programming. Meanwhile, real-time specifications are detected by the support of Linux+RTAI/LXRT.Backlash compensation performances are detected by setting up machine backlash model. The model can simulate backlash error compensation ability of NC device for detection. Position and speed commands are collected to calculate the contour error, tracking error and speed fluctuation for evaluating of the position control performance. Based on time division interpolation principle, detection platform directly receives position data to reverse calculate the value of interpolation cycle. Finally, platform detects Nurbs spline interpolation functions and performances.By detecting the backlash error compensation performances of NC device and analyzing the detection results, a multi-cycles comprehensive backlash error compensation algorithm is put forward to improve compensation ability by using the detection platform. The "test driven improvement" function of the detection platform is illustrated by the above example.

Related Dissertations

  1. Moving target trajectory analysis based Intelligent Traffic Monitoring System,TP277
  2. Research and design of the automatic cutter intelligent control system,TP273.5
  3. The Research on Software Implemented Hardware Fault Detection Techniques in Radiation Environment,TP311.52
  4. Study on Network-Constrained Detection Algorithm Based on Graphical Model,TN929.5
  5. The Research of A Danger-inspired Artificial Immune Model Based on Fuzzy-set,TP393.08
  6. SDR algorithm based on semi- definite relaxation for MIMO Detection Technology,TN919.3
  7. Research on Outlier Detection of Multivariate Time Series,TP311.13
  8. Research and Implementaion of Image Processing Algorithm Based on FPGA,TP391.41
  9. Digital signal processing technology in Power Quality Detection,TM933.4
  10. Embedded Wireless Video Surveillance System,TP277
  11. Based intrusion detection system call implementation and evaluation,TP393.08
  12. Research based on the data warehouse materialized views of data consistency maintenance methods,TP311.13
  13. Direct Sequence Spread Spectrum Signal Detection and Parameter Estimation Technology,TN914.42
  14. Study on Detection Algorithm of Traffic Incidents and Detectors Distribution of Freeway,U491.3
  15. Study on the Critical Techniques of Freeway Incident Management System,U491.3
  16. The automatic welder positioning technology research,TG43
  17. Study on Image Registration Techniques with High Registration Ratio and Quick Velocity,TP391.41
  18. Based on the log information statistics ( anomaly ) detection algorithm design,TP393
  19. Study of ECG Online Detection Methods,TH77
  20. Liquid medium and small target detection algorithm and its application,TP274.4
  21. An Improved Hierarchical Clustering and Outlier-detecting Algorithm and Application on the Data-mining Platform,TP311.12

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile