Dissertation > Excellent graduate degree dissertation topics show

The Dynamic Simulation Based on Multi-body Dynamics of Fine Blanking Die

Author: HuangMingZhu
Tutor: WangYiLin
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: Fine Blanking Die multi-body system numerical simulation stress analysis
CLC: TG385.2
Type: Master's thesis
Year: 2011
Downloads: 59
Quote: 0
Read: Download Dissertation

Abstract


Fine Blanking Die based on the precision blanking technology is a kind of precision equipment which can process parts with complex geometric appearance, it has been widely applied in various complex processing fields, such as half cutting, sinking holes, bending, chamfering and so on. Fine blanking die as a research object, the paper conducts in-depth study on the solving method of the dynamic stress and dynamic moment in the blanking process of Fine Blanking Die, and achieves the following results:Aim at the problems of complex sheet deformation and low mould life, the paper adopts numerical simulation technology and virtual prototyping technology, carries out a dynamic stress analysis, and simulates the dynamic force status of punch. Thesis adopts the collision contact method and the spring - damping unit linearization method, and establishes a relationship of force between separate parts, blanking strip and punches. Aim at characteristics of sealing cover which is used to seal bearing, the paper adopts the top-down design technology and creates a solid model of Fine Blanking Die .It adopts the mesh dissection technology to finite element, and analyzes the force situation of some parts, Thesis establishes a complete rigid multi-body system dynamics model of fine blanking mould. Through solving calculation, the research obtains the rule of the dynamic characteristics of the key parts, and dynamic bending moment changes of the whole mould.The result can provide a new test basis to prove whether it is a reasonable design for the mould, and some test data for further research on the fatigue tests of Fine Blanking Die.The virtual prototype technology will greatly shorten the design time of Fine Blanking Die, reduce the development costs and enhance the economic benefits of enterprises.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Transient Thermal Analysis of Multi-Body System with Complicated Boundary Conditions,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. On the Simulant Research of the Pneumatic Cleaning Mechanism of Mini-combine Harvester,S225.3

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Cold stamping ( sheet metal processing) > Cold punching machinery and equipment > Die
© 2012 www.DissertationTopic.Net  Mobile